Search results for query: *

One more idea where would I find the round trip delay because after looking in the I and m manual under troubleshooting it says that if keys don't display correctly that there is a synch problem and it might be so minor that it only affects the 3900s thanks

OK some good news i outed all the phones on the 9150 and started new now i am getting dial tone but the issue with the 3900s where you plug the phone in you see the exts for about 3 seconds then it says autodial if you press the key you get dialtone with the correct ext. the phones are rls 11...

No the programming is correct when i first put the systems in i used 3900 sets until i saw the display problem then i outed the lens (sl100 tns)and reprogrammed them as 2000 sets that is correct. You can get pretty tech with me i have been doing Nortel for 20 years going back to A switches...

I hear you these 9150s stink. I hooked up a modem to the RLC and gave ETAS access into the rlc and 9150 he checked everthing said it all looked good and its 2000 sets i hooked to it for testing. One piont you made i hooked up initially 3903s and the display were incorrect instead showing the...

Hi Everybody, I am installing a 9150 unit and we have the link up i actually installed 2 at this site 9150 1 works fine no problems 9150 2 you program the phone CS2100 open up the ports on the Reach Line Card always restarting both sides after any program changes then x-connect the phone i...

This is a BCM 50 with a PRI expansion channels 1-6 are provisioned the problem is the cust. forwarded the old number to the new did port 201 is now ext 1908 which is the 4 numbers of the did and the line 125 is also on the phone if you call the old number it rings on the intercom 1908 saying...

First disable the general delivery mailbox, make sure every phone is set to one more ring than the aa good luck

Guys you were right ext. 21 was set to 4 changed to six everything started working great!!!!!!!!!!

I was told that i have to go into system programming change drt to no and transfer recall? to 12 and that should solve it sound right?

I just installed a cics rls 7.1 with a call pilot 100 i changed the lines to answer after 5 rings from 3 then i was told that i need to change the fna to 6 rings for the phones to mailboxes well my greeting (greeting 1) no longer plays it is a generic one and the lines pickup (AA) after 4 rings...