Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
ASA / Wireless / VPN
I have created a subinterface for a Wireless only subnet on an ASA. This is also providing the DHCP for the wireless subnet. Now I would like to bring wireless users in as securely as possible, within the constraints of the network infrastructure. On AP. (AP will be locked down as securely as...- leaky5
- Thread
- Replies: 2
- Forum: Security, hacker detection & forensics
-
Basic PIX setup required.
The whole network was in the process of being redesigned/implemented when the previous engineer left, I have only worked for the company for a few weeks and had to pick it up. In effect there are 2 internal networks, DMZ and Inside and then a connection out to the company network, this is...- leaky5
- Post #5
- Forum: Security, hacker detection & forensics
-
Basic PIX setup required.
Hopefully there is enough info here, I have cut out all the rubbish. At the moment it is working from DMZ to Inside, but I think that was more luck than judgement, I made the inside sec level lower than the DMZ on. PIX Version 7.2(4) interface Ethernet1 nameif inside security-level 40 ip...- leaky5
- Post #3
- Forum: Security, hacker detection & forensics
-
Basic PIX setup required.
I have been 'left ' a half configured pair of Pix's to finish configuring. It has Interfaces setup, IP any any ACLS and matching access-group statments. But I can't connect from the outside (sec level 0) network through to the inside (sec level 100) network. I am not worried about security...- leaky5
- Thread
- Replies: 5
- Forum: Security, hacker detection & forensics
