Search results for query: *

Id have to concede it was part of the problem Ben But it has worked with that cable before. Thing is, its already tough to setup without the port and the PCI card wouldnt have helped. I see a lot of threads about the lack of USB port option for SP3. It seems to me that, eliminating the...

thanks Ben, I decided it was probably wise to go to Intel for chipset drivers and install them rather than the ones on the manufacturers CD. I dont know if there was a difference but I installed them anyway. Im happy to say this situation is now resolved I obtained a shorter 2m USB cable today...

it might look like that, but the USB2 controller is in 'Other Devices'. Theyre actually should all be USB2. I can get along with 6 ports, 8 was overkill but might have been handy Host controller: Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC

thankyou folks its really close I removed the PCI card, shut down, turn off mains power to reboot mobo. When I got back in I got the device list up as quickly as I could right click on unknown device and uninstall it. Then it would look for a driver, pop it into 'Other Devices', were I can right...

look for a tool called unlocker 1.8.7.exe in google, its free. And get yourself a new .dll from a download site you can probably delete this file in windows, no safe mode needed, use kill process of unlocker which should come up automatically

smah (MIS) 21 Sep 09 12:35 If you right-click on the 'Unknown Device' in Device Manager, can you manually load the driver from the cd? thanks for the reply yes tried that too, it looks for an .ini file, Ive tried directing it to the XP setup disk in the CDROM, and tried "have disk" going...

manhunter2826 (TechnicalUser) 21 Sep 09 11:38 If the above suggestions don't work, and I suspect they will, you could try plugging in the printer, wait for Hardware Wizard to kick in ('Windows has detected....') and then browse specifically for the driver on the cd-rom (or download)...

r0gerc (Programmer) 21 Sep 09 11:33 Did you wait until the setup software asked you to plug the printer in? Sometimes this is needed. thanks for the reply Roger yes Ive been at this a few days now, and tried it every way I can think of. All I get is a "USB Device not Recognised" bubble on...

Turkbear (TechnicalUser) 21 Sep 09 11:22 Hi, Just a basic question but have you just plugged the printer into an open USB port ( probably best to use one of the back ones) and tried to print? thanks for the reply yes, Ive cleared all other ports of USB devices, and then tried every port on...

Hardware Gigabyte G31M-ES2L E5200 dual core, 4Gb RAM, 320Gb HDD, 8 USB ports from Intel 82801G (ICH7 Family) USB Universal Host Controller & VIA Rev 5 or later USB Universal Host Companion Controller, comprised of 2 front USB ports, 4 rear USB ports, and dual USB ports from a PCI card. OS XPPro...