Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
How do you manually reset
... 'AT-X2' - this erases current config in memory 'AT-X3' - this erases config on flash Additionally you can use 'AT-X' it will "destroy" also software/bios on IPO. When you did it you have to be sure that your WORKING DIRECTORY in Manager has correct *.bin file (f.e. for...- GMPST2000
- Post #5
- Forum: Avaya: IP Office
-
IPO403 - BRI Backup when WAN down
About your post. You are right! Everything was OK when I've connected to NT (directly to BRI). In my office I've used end-user line from PBX, because we have only that card. All your tips are Ok. It works OK on voice-end-user BRI. BR- GMPST2000
- Post #4
- Forum: Avaya: IP Office
-
IPO403 - BRI Backup when WAN down
Dear IPO Admins. When you connect IPO BRI to PBX end-user line - IPO is looking for channels in BRI started on CH1 and after non-signal started in CH2. So CH1....CH2....Ch1....Ch2 To correct connection in BRI BCKP you must dial manually "bad channel" andstay ready on good Channel in...- GMPST2000
- Post #2
- Forum: Avaya: IP Office
-
IPO403 - BRI Backup when WAN down
Dear Users and Admins and Others Hardware = IPO403 - ver. 1.3(32) WAN = HDSL 2048bit (protocol V.35) Inside configuration I've added correctly WAN all options and WAN works correctly (!). I've added BRI numbers in field TelephoneNumber in Service (Intranet Service SiteB) at SiteA and my problem...- GMPST2000
- Thread
- Replies: 3
- Forum: Avaya: IP Office
