Search results for query: *

I'm still stuck. I have removed the ip addresses from switch 2 and double and triple checked that ip routing is not on, I've removed static routes and anything else that had an ip address on it. I've even checked the menu system against my config to make sure. I've checked over my cables and...

Ahh ok, but I won't be able to ping other switches machines from the switch if I do that, will I? It's not a big deal so long as the machine using the switch can communicate to other servers. Is there a way to assign a default gateway for each vlan. Thanks for the help guys, you've been great...

Hi thanks for the reply. Port 48 on switch 1 is connected to port 1 of switch 2. Port 48 of switch 2 is connected to port 1 of switch 3. Sorry just noticed I have a spelling mistake I've listed switch 1, switch 2, switch 1. It should be switch 1, switch 2, switch 3.

Hi Guys, I still need some help on this. I still cannot get my switch on the second vlan to work I can't ping anything etc.... I thought I just had to set the ports to untagged and then connect to the other switch when I plug a machine in to one of the vlan 200 ports it doesn't talk to the...

vinceWhirlwind - This is what I thought, but I couldn't get machines to talk to each other across the switches. I'm going to try again I must have missed something. Thanks Cajuntank - sorry the diagram was rushed. Totally agree with you about moving off vlan1- wasn't my config and will be...

Thanks for the replys thats some great information. I have drawn a visio diagram to give a clearer picture. To clear up some points these two networks cannnot talk to each other them must be separate. each network has it's own firewall and internet access. I just want to use half the switch for...

Hi, I have a setup where I have two separate networks both are flat switches, in other words there are no vlan's just the default1 vlan. I have a nice hp 2910 48 port layer switch which I want to connect to both networks. The first network was easy to setup, using the default vlan I assigned...

Thanks for the reply Cajuntank, this is quite a long reply Sorry Yes you are correct that the first switch is the main switch which is connected to the internet etc.. The bit I am getting confused on is If I can recap with a bit more detail so you don't keep having to reread my other post...

Hello, I hav two 2910al 48 port layer 3 switches. I want to have one switch as one vlan and the other switch as another vlan. I'm trying to work out which is the best way to connect the switches together regarding vlans. I have setup a trunk between the switches on ports 47 and 48 on both...

Hi I have a site that when I click on site permissions the list shows that a group of users have limited access as well as contribute rights to the site and to two folders in a document library. When I go to the folders and look at the permissions the user group only has contribute rights. So...

Hi, Have just loaded up my website to my hosting company and have a bout of errors. I have added missing dll's to the bin directory and I was hoping that would be that. but now I have this error and need some guidance. Parser Error Description: An error occurred during the parsing of a...

Hi I have come across a server that has an array configuration as follows physcial disks = 3 * 300GB logical disks = 2 286GB in a RAID 0 Configuration (Logical Disk 1) 381GB in a RAID 5 Configuration (Logical Disk 2) My question is how has they done this? There isn't any unused space of the...

Hi all, I have this setup which is giving me a head-ache. br office 192.168.17.0/24 | | Cisco pix 192.168.17.254/24 | | vpn tunnel between the pixes | Cisco pix 10.0.0.254/24 | | External nic of isa 2004 10.0.0.1/24 | Internal nic of isa 2004 192.168.16.2/24 | | | Internal clients...

Hi all, I have a pix 501 with 6.3 on it I have allowed fixup protocol pptp 1723 but I still cannot get my internal users to access a vpn in the states. I have tested the vpn without the pix and it works fine. Below is the script thanks for the help Any ideas? PIX Version 6.3(5) interface...

Hello, I have two sites connected by cisco pix and this works fine. at the head office the pix connects to a SBS 2003 server which is running ISA server 2004 (this creates a DMZ). I need to get machines from the branch office to talk to some applications on the SBS server however isa is stopping...

Hello, I have a problem where I have added a ssh to my PIX and now the lan to lan vpn doesn't work. I have added both scripts below. any advice would be great. Head office PIX Version 6.3(4) interface ethernet0 auto interface ethernet1 100full nameif ethernet0 outside security0 nameif...

Hi, I have trying to work out how to setup backup exec 11d to backup and restore individual mailboxes using the information store. I have set the backup to use the "enable the restore of individual mail messages and folders from information store backups" I have set it to backup to a tape device...

I haven't got a fixup protocol pptp ? any other ideas

Hi I have installed web marshal but as it runs through the configuration wizard it will not register the isa filter. Has anyone come arcoss this or can anyone help to get this working. cheers

just read it, thats great I'll give it a go. Thanks for the help :D