Search results for query: *

Greetings. I'm looking at a Norstar 3x8 DR1 for a residence. Can't find a feature list. Does DR1 support disconnect supervision? Anyone know where I can find a feature list? Thanks! Mike

Used to work for MTS (multi-tenant systems). 3 Locations. Our switches were in the basement and we would re-sell dial-tone. I'm sitting on an Option81c/CS1000 that I picked up for free, just to get it out of the way for their new VoIP; and I don't know what the big draw is. New wiring, every...

Well I finally got it to work; and apparently the "D" is necesary. Initially after I programmed the darn thing I would hear the Menu that I set-up at the primary store. Not knowing the digits it was dialing, added to the mystery. If I programmed my cell phone into the string, it worked...

...and at least start the ring cycle. I think I did try #PD602XXXXXXX. it didn't work. There are 4 special characters allowed in the string... #,*,P,D. # = Link (F71). * = Cancel P = Pause (4 seconds) D = Recognize Dial Tone (1.4 Seconds). I cannot find any information on the * command...

...the call. Tried: #602XXXXXXX - Doesn't work. Tried: #D602XXXXXXX - Doesn't work There are only 4 characters that will work in the string... # * P D p d. The * = Cancel. Why or how that could be used in the string, I don't know as there are no examples. I listened to the dial-out...

Nortel4Ever wasn't even part of the thread, but yet he came across as an extremely sensitive authoritarian eager to mix it up and admonish people he doesn't even know. I'm a naturally curious person and I always want to know why. I'm sorry if that offends you I've been a Nortel tech since the...

I wasn't arguing with anybody; in fact I was agreeing with @curlycord. Don't know why your panties are in a bunch... please explain.

I'm going to try MICS Centrex Software and see if i can get it to work. I really want to use the link feature instead of a line in and another line out... the Church only has 3 lines. Thanks all for your input!!!

...is that the key/secret? So still the question persists... Why won't the Link (F71) command work on the MICS; it works on the phones to transfer a call to a cell number. "MICS XC 7.1 Installer guide says yes on page 392/Services. F71, F78, F*89, F*9, F804", but F71 dun't work. Thanks...

...Destination Code to make an extension call forward to a cell. I got it to work with a Destination Code of 300 and it works using a line in and a line out. Anyone know how to get "Dial Out:" F71 to work? MICS XC 7.1 Installer guide says yes on page 392/Services. F71, F78, F*89, F*9, F804...

Greetings! Norstar MICS 7.1. Client would like to call forward her extension (not line) to her cell. Familiar with F4 and F84, but neither works. Need a bump. Thanks! Mike

Thanks for that Phoneguy!!! Don't know how it got switched. I never use the Call Pilot Interface. Thanks! Mike

Solution Found!!! I've even tried "Outbound Transfer" to an extension and when I press 7, Voicemail says... you have started to enter a message command. Your choices are... 0 Message option 1 Reply 2 Play Envelope 3 Forward 4 Reply All 5 Compose 6 Delete 9 Send How can Voicemail use 7 as the...

I've even tried "Outbound Transfer" to an extension and when I press 7, I'm getting a Menu... 0 Message option 1 Reply 2 Play Envelope 3 Forward 4 Reply All 5 Compose 6 Delete 9 Send This is so weird. Thanks! Mike

Impossible or not, I've included the picture. I'm using an inside phone 7316e and I'm calling the AA from Line 3. When Line 1 answers, I dial my extension (314) and my 7316e display reads unassigned. I thought it was referring to the Attendant being Unassigned, but the Attendant has been...

It is impossible to dial into a company and see text on your display that is related to the phone system your calling. The only thing you should see on the display is the # that you dialed. How exactly are you calling into AA? Using your mobile phone, dial into your main #, wait for AA and...

Yes all 3 lines are in Pool A... all have Supervision. And I have programmed "Outbound Transfer" (digit 7). I call into the AA and enter my extension and I immediately get "Unassigned" in my display for 6 seconds, then the display reads "Line 3". See pic. I've been installing and programming...

Greetings! I have setup "Outbound Transfer" in my mailbox, but I just can't get it to work. Turned on in COS. Line Pool Assigned. Turned on in mailbox. Telephone number programmed. When I call in to the tree and enter my mailbox, the display says Unassigned? Doesn't seem like I missed...

Thanks curlycord!!!

Greetings! I have an MICS (7.1) with one caller ID card. The caller ID worked ok with their last system, but I'm getting weird characters. [V... >[V... 480 239 4724... H329... unknown reason... Line 001. Is this indicative of the card going bad? Are there versions involved? All my settings...