Search results for query: *

I ended up getting this to work. The problem was not the firewall but the gateways.

Thanks for the heads up I will give that a try. If you dont mind me asking why would changing the acl to standard help this issue?

I was hoping someone could look over my configuration and shed some light on the issues i am having. Once I establish a tunnel my ability to use the internet on client machines goes away. I thought this was a split tunneling issue but everything looks okay to me. The other issue I am having is...

Ok so I am scratching my head here and I'm hoping someone can help. I have a system running xenserver 5.6 with a few VMs on it. It has two NICs, network 0 is running fine but network 1 is dropping packets like crazy. The odd part is it will work without an issue for about 20 min, then it will...

The router is working wonderfully. I appreciate the feedback.

I'll do that. Thanks again.

unclerico thanks for the response... the NATing was disabled, this was unnecessary due to the fact I have the firewall doing so. Good catch on that thanks! As for specifying the next hop IP address on the exit interface that will not be an issue, but my question is why? I'm just curious if you...

Hello everyone. I'm hoping I can get some feedback on a config I have been working on. I'm binding two T1s we have in house for our backup internet connection. I'm using a cisco 1720 router for this task... if someone could look over the config and tell me if it looks like I am missing anything...