Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
printing raster graphics at the top of a PCL page
Thanks for your help Jim. The problem was caused by a line feed carriage return being added by the concatenation, inbetween the *b0M and the image. -
Possible Right Margin Problem
Thanks for your tips. The problem turned out to be with a driver setting. There are two settings on the driver. One was to truncate long lines and the other set the maximum number of columns to 135. -
Possible Right Margin Problem
I am currently trying to write a report using PCL which will print in landscape to A3 paper. When I attempt the second 'DELIVERY NOTE' label this label is not printed at the top right of the paper, which I am attempting, but is being printed at the left hand side of the next line. The PCL is... -
printing raster graphics at the top of a PCL page
Thanks for your tips. I've made the margin 0 and although this moved the text in the report upwards by 1/2 inch the graphic will not move any further upwards, even when using the *p-400 command. I used ImageMagick to create the raster graphic but have also then used Hex Editor to set the first... -
printing raster graphics at the top of a PCL page
I am attempting to print a logo at the top of a page which is sent to a HP laserjet printer. I can enter text and use HP-GL/2 vector graphics to print text or lines close to the top of the page, however I cannot print a raster graphic at the top of the page. I have checked the raster graphic...
