Search results for query: *

Hi, I had the programming correct apart from the COT once I added that in it worked! Thanks again for your help

If Clima is the only way could you please point me in the right direction on how it is programmed, and help would be great.

I am looking at barring an incoming Call to the OS4k, what would be the best way to do this?

What is the Best way to block an incoming call from a nuisance number?

Yes it's not Richt as it is configured the same as the other links i have and DTMF works ok on them. update on the issue Incoming call goes to the Operator Via the IVR which is fine the Operator then forwards the call to a number which is offsite Via DPNSS to a Mitel system then that number...

Sorry But that is what i thought it could be but this was already in the COT for the trunk to the IVR

Hi, I have a Hipath 4000 V6 and i have an issue with optipoints dialing DTMF when I dial in to an on site IVR and try to select and option I get "NOT POSSIBLE" on the display, I have check all the programming for the Trunk and the COT and the Richt and everything seems correct. Any Help would...

I have had an issue that when i try to do a RISO back it fails with the following 2024-07-04 10:18:21# Recovery ISO backup creation started on Node2 (id:102700) manually, output to ['HD'] 2024-07-04 10:26:10# Local backup creation on appliance ended with error, result code: 88 ERROR: Error...

hi could you not set up a new ODR and outpluse 210?

The issue has been resolved by setting the APIMAX in Zand

Thanks That worked a treat!! But i have a new issue with The application When i logon i get the following warning Hipath Provider The logon of the TAPI Component Could not be executed Please check the availabilitu of the TAPI interface in the communication system for the used call number...

HI, I have installed the latest Version on Openscape PE and it is connected to a OS4k V10 latest version of software when i make a call everything works but when i try to dissconect the call by Clicking the RED disconnect key it comes back with "nothing stored" and i need to use the speaker Key...

Does anyone know what this stands for as in the V10 documents there is no cause=20 QUERY: unknown CAUSE=20, SUPLSERV=1. Thanks

could be the connection matrix in LCR?

Hi has anyone has this issue after the STMIX has lost the LAN connection and once the connection has been restored the CP100 Sip client's don't comeback into service?