Search results for query: *

Hello thkatana, I understand that you want to do like: user call in and got IVR (DISA) then press ext and now you want that when user press ext number, and pbx will route call to cellphone. If this is the case, you need to have Activation Key KX-NS1xx and set Mobile Extension to Enable then...

If you don't want to involve in VoIP (SIP/H323) then I'd suggest you to use bridging. Refer to this link: http://www.cisco.com/c/en/us/support/docs/ibm-technologies/source-route-transparent-srt-bridging/10676-37.html#ex9 BRG Huong

KX-TCA285/385 is DECT Handset. It connect to IP-CS (NCP0154/0158) via DECT while IPCS (NCP0158/1054) connect to PBX via LAN (MGCP) BRG Huong

rmweiss, I could not download the file from pastebin.com (server not found). Could you pls repost the log? BRG Huong

rmweiss, Can you get and post sip trace? BRG HUONG

Hello, You can try SIP DECT by using TGP600 (support up to 8 handset) or IP-CS KX-NPC0154 (support up to 8 handset, handset can be TCA285/385) BRG HUONG

Ruan26, Yes, for KX-NT500, need TDE100 with software ver8. After upgrade try to put Registration mode for IP Phone in PBX to Full Automatic first then see if NT Phone register or not. BRG HUONG

Hello, Using rate limit command under sub-interface will do: rate-limit To configure committed access rate (CAR) and distributed CAR (DCAR) policies, use the rate-limit interface configuration command. To remove the rate limit from the configuration, use the no form of this command...

Hello, With your network diagram, you can do setup to simulate T1 PRI provider by doing tunneling Q.SIG or Q.931 over SIP. Refer to this link for more detail: http://www.cisco.com/c/en/us/td/docs/ios/voice/sip/configuration/guide/15_0/sip_15_0_book/tunneling_qsig.html#wp1054731 BRG HUONG

Kramla, Try to login cisco 1841 and post your output of command show ip nat translation. You can try to add ip nat inside under Sub-interface of Fa0/1 and try again. Appreciate if you could post your 1841 configuration file. BRG HUONG