Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Mirroring whole drive
use network printer is a lot simpler. to set it up: 1.a printer on network can communicate with your aix server. 2.add that printer's IP and printer name in your aix server's /etc/hosts 3. download from the printer website for the aix driver and install it to your aix server. if no driver is... -
Mirroring whole drive
SeanAIX430 (TechnicalUser) 28 Jun 07 12:45 # lspv -p rootvg 0516-306 : Unable to find rootvg in the Device Configuration Database lspv is the command to look up pv information. rootvg is a vg, it's not a pv. therefore, this command will failed. no need to worry. lsvg -p rootvg //... -
NIM mksysb resource fails on nfs error
are you trying to create an lpar using a mksysb from nim master? have you run smitty nim_bosinst before booting off the network using the new lpar profile? -
Help with VIO networking...
Here is exactly what you need: http://www.redbooks.ibm.com/redpieces/pdfs/sg247940.pdf chapter 4, 4.3 SEA failover one vlan is one network. for example, vlan1, vlan2... you can seperate your lpar1 to go through vlan1 and lpar2 go to through vlan2. the details are in this redbook. -
A NIM Question
Your problem really is because you are having a mksysb image and you try to create a lpp_source. If you want to define this mksysb as a resource for nim master to fush it to another lpar or use this mksysb, you should define this mksysb resource as type of mksysb, not lpp_source. from define...
