Md110 BC13: i try to setup CIL output via ehternet interface and work well. Is it possible to send to output only outgoing call (only "M" call routed via LCR) My billing application doesn't need to receive internal or incoming records.
Tank you
My One-box IVR need to transfer an external incoming call, to another external destination.
It work very well but system wait the answer from external number.
If I try to transfer before answer, call return to IVR. Why?
Thanks
Md110 Bc09, connect via qsig with pabx A (Tenovis integral 55) and pabx B (Cisco Call Manager).
Cisco can call Tenovis but non vice-versa. Tenovis use 1040xxxx where xxxx is Cisco Extension).
I Activate q931 debug in cisco but I dont'receive any setup from Md110. Tenovis can call any Md110...
Hi, all. I need some infos about dialing Plan.
I'm going to connect Md110 with Avaya Cammonication Manager via q-sig link. Some users will migrate from Md110 to Avaya. Simple solution should be dedicate 2xxx extension to one site and 3xxx to another and define 2xxx and 3xxx as roddi each other...
Hello!
I'm testing qsig between Md110 (bc9) and Avaya Comm Manager
I can forward call from Avaya to Ericsson but no viceversa.
When I try to dial: *21*8100# (8100 is Avaya ext.) the Ericsson phone display: "Wrong format".
<RODAP:ROU=56;
ROUTE DATA
ROU TYPE VARC VARI VARO...
I understand.
So, traffic between different network (no visible between them) is possible only if I have 2 gatekeeper on two LIM, and the call is connected by sys-link.
Now is clear.
Tanks!!
No, Gatekeeper is in DMZ, in another network.
Netw a: 10.142.177.0/24
Netw b: 10.142.111.0/24
DMZ: 128.1.14.0/24
Routing to A and DMZ= ok
Routing to B and DMZ= ok
Routing to A and B =NO!
I need information about RTP packet sent from a Phone to another, in different network (hub and spoke)
Explain:
Phone A is in network A
Phone B is in network B
Md110 Gatekeeper is in DMZ network
Network A and B cannot communicate each other but only with DMZ, (where are application server like...
I have this configuration:
Md110 BC9 With DNA
PPM 3.0 installed on Windows xp
Microsoft excel 97.
All application in DNA suite work fine (also PDM) but PPM can't access to database server. PPM works only in a NT pc.
Is a ODBC problem? PPM works only whith NT environment?
Tanks!!
I'm trying to understand the meaning of this report:
ROUBWY
ROUOUT
ROUDDI
ROUINC
ROUDIO
Can someone explain brefly what are the difference beetwen them?
Ok. The problem is: I have a Md110 (BC9) connected to Tenovis Integral 55 with Q-sig link. Integral side I can verify that CRC in on, but what about Md?
I dont' need to change CRC but I need to be sure that is ON!!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.