Hello
I configured a Cisco ip phone from my CCM 4.3 administration windows. I want to forward the call to Ext. 200 while my Ext. 100 is busy. I have activated next config on the Device Configurtion window:
Admin. Window Ext. 100
Forward Busy Internal: 200
Forward Busy External: 200
When i...
Hi
I have insterted a vic2-4fxo card on one of the VIC modules of the Cisco 2801 router. When the router starts up, i cant see the voice interface card on the show run screen.
It seems that the router do not recognize that Voice Interface Card. What else could be the problem?
Thanks in...
Hi
I have a VoIP network with a CCM 4.1(3) and a Cisco 2801 Router. Sometimes, when a call is made or recieved to and from the PSTN, i hear my own voice even laughter than my peer on the other side of the phone. How can it supress this echo?
Thanks in advanced
Alfredo Zazueta
Hi!
I have a Cisco 2801 with no Flash memory. Im trying to boot it from a TFTP server wich is connected to the interface FE0/1 from the router with a static IP address.
Im using Tftpd32 installen on my computer as TFTP Server. I have tried the configuration shown bellow with no results...
Hi.
I updated my CCM 4.1(3) Version 5.2.5.0 with the Devpack-89 in order to get my 7945 ip phone registered on my voice Network. After installation of the Devpack-89 and reseting the MCS, now i can't insert any ip phone to my voice network. These two Warning! messages apears after i clicked...
Hi.
I updated my CCM 4.1(3) Version 5.2.5.0 with the Devpack-89 in order to get my 7945 ip phone registered on my voice Network. After installation of the Devpack-89 and reseting the MCS, now i can't insert any ip phone to my voice network. These two Warning! messages apears after i clicked...
What happens if i instaled my Cisco OS and CCM 4.1(3) on a MCS 7800 series and i use the product keys given on Cisco.com (for booth, OS and CCM 4.1(3)) and i get a Cisco IP phone without License. can my VoIP network be deploy?
Yes, the Cisco IP Phone is in the same network. In fact, i connected a pc on this network and it was automatically assigned an ip of the DHCP Scope that i created for the telephones. My socpe is the next: 20.20.41.40 to 20.20.41.50
My PC got the 20.20.41.41, and my phone just displayed...
I installed the Windows 2000 Server and the CCM 4.1(3) on a MCS 7800 series, booth of them with the product keys given on Cisco.com. I configured my Cisco voice network on the Cisco Call Manager Administration page. I created a DHCP Scope for IP Phones. When i conect my Cisco IP Phone it...
I just installed the OS and ccm 4.1(3) on a MCS 7800 series.
I used for booth products keys given on Cisco.com. I configured the Call Manager Administration and Cisco Service Configuration following the step by step on Cisco.com. I configured a DHCP Scope for the IP phones.
Then, when i connect...
I installed the Widonws 2000 OS and CCM 4.1(3) on my MCS 7800. I used the Product Keys Given on Cisco.com page.
Then created a DHCP Scope for my phones and avtivate TFTP 150 option etc.
On Callmanager Administration and Cisco Service Configuration i activated all services and made all the...
I have changed the location of my Cisco Call Manager Server (CCM 4.1(3) running on it) and i created a new server with a new DHCP. Then when trying to access the Call Manager Administration page, it displayed the next message "the hostname in the server security certificate does not match the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.