Search results for query: *

Curtismo, We are exploring the option of moving a number of BO tunnels from a Contivity over to our 3050 deployment and would appreciate it if you could expand a bit on your "varying issues with tunnels dropping, etc." post.

Burt, The question has been answered at this point but thanks for your input.

Burt, Actually, the confusion comes in because the DSL router has two paths into the backend network. One is the 3002 the other is the Linksys. Due to the fact that the far end concentrator has the public IP of the DSL router as its peer any connections initiated from the far end office would...

This one has me scratching my head a bit. Keep in mind I have not laid my hands on any of the gear described here nor have I even been to the site in question. Here is the scenario... A dsl router with one public port/IP facing the Internet and two ports on an RFC 1918 subnet A Cisco 3002...

I am looking for a way to reset the interface statistics on a 2430 router while at the CLI or in the BCC.

We ran into a similar problem. Use the 'copy' command instead of the 'cp' command. Also, this may be obvious but ensure your tftp server is running and accepting connections.

Has anyone successfully set up a Contivity w/ T1 CSU module as a frame relay router? We can get RIP traffic to traverse the circuit but data traffic will not pass and the log shows no indication of a problem. 1. SW V6.00.310 2. Firewall enabled w/ any any any allow rule 3. LMI set properly as...