Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: jvpgr
  • Order by date
  1. jvpgr

    ASA 5510 with ADSL Router Problems

    thank you very much unclerico!! just another question, the ADSL supports DMZ on one ip. If I put the outside interface's ip as DMZ for the ADSL would have some similar result and would it will be a bad security case ?
  2. jvpgr

    ASA 5510 with ADSL Router Problems

    ... and something that came to my mind after posting the previous post ... would it be (almost) the same if I forward on the ADSL the required ips/ports to the outside interface instead (I allready tryed to the servers themselves, dut it didn't worked) ? Even though I though that the ADSL...
  3. jvpgr

    ASA 5510 with ADSL Router Problems

    thank you for the advice unclerico, but how I will configure 5510 to handle the PPP then ?
  4. jvpgr

    Cisco ASA 5510 default configuration with ADSL router

    thanks for the tip FJR, it worked :) as about your question, it was pinging the ip w/o problems from the CLI. eventually could you possibly help with my other (next) thread on the same router ? It is here: http://www.tek-tips.com/viewthread.cfm?qid=1515423&page=1
  5. jvpgr

    ASA 5510 with ADSL Router Problems

    Hi all, I need to connect an ASA 5510 through an ADSL Router to the internet, in a way that the internal web & mail servers to be accessible from the outside, right now there are no problems accessing the outside zone (internet) from the inside but I have no success with the opposite. Any...
  6. jvpgr

    Cisco ASA 5510 default configuration with ADSL router

    Hi all, I am new to cisco and I am trying to configure an ASA 5510 to replace a Linux box for the following situation: LAN ---- 5510 ---- ADSL ROUTER ---- internet Then Inside IP of the ADSL is set to 192.168.2.1 and is bound to Ethernet 0/0 of the 5510 with IP 192.168.2.2. The NAT is...

Part and Inventory Search

Back
Top