Search results for query: *

Thanks for clarifying the blue/black and blue/yellow. I was lazy in my typing. In your example is Pin 4 Ring and Pin 5 Tip? I thought is was the opposite.

Thanks. So it would go like this? Black/blue = pin 1 = transmit Black = pin 2 = receive Yellow/blue = pin 4 = transmit Yellow = pin 5 = receive

I need to extend a T1 from demarc in basement to my suite on 1st floor - rooms are basically directly above/below each other. There is a 25-pair cable between the two rooms with only the white/blue, white/green and white/orange pairs being used. Suggestions/recommendations on how to extend the...

Thanks for all the helpful posts. The alarm company was sharing with a line going into the phone system but, as someone suspected, they reversed the wires. Ended up taking the alarm off the phone system and putting on the fax machine line.

I have a bcm50 with 4 analog lines. They are set to ring 4 times and then go to the automated attendant. When this happens they go to a person's voicemail box greeting instead of the greeting we recorded. I have the lines programmed to go to auto attendant. I have call forward no answer turned...

Keeping it off the phone system was my thought as well. It was previously connected to their phone system. If I following the cable from the jack at the alarm panel, the yellow/black is punched down on the 66 block at the demarc and the red/green is beanied (my thought is to the phone system)...

forgot to ask my question - which is better and what wiring changes would I need to make?

My customer updated their telephone lines and now they don't support their alarm system. I have two options: 1) connect an analog line into the phone system but then they will lose one line in their hunt group. 2) connect the analog line directly to the alarm system and eliminate the phone...

WIll the Vwic port accept a standard T-1 crossover cable? I would use pins 1,2 and 4,5.

Is anyone familiar with implementing Call Manager with at&t's IP FLEX? From what I understand - Existing PRI terminates on 2811 router. In Nortel world is this equivalent to Digital Trunk Interface card? IP Flex includes Cisco router with T1 card for voice and FE card for internet. Do I...