Search results for query: *

Dear Inlsp05! my system still shows error code 324 after 20 days. I Must perform a side change (DCESI:Lim=7,CSSIDE=;) then the signal will be good. I still haven't figured out what the error is. Brs!

Thank you Inlsp05! My system has used duplicate control for many years now. It still runs fine. But now I often get error code 324 as above. I will try to do as you instructed: Cnboe:bpos=7-0-10; Cnhui:bpos=7-0-10; Thank you very much Inlsp05! Brs!

Hi everybody My MD110 System has got 15 lim. Recently my system has a warning at lim 7 as follows: CLASS: 2 324 FAULTY TMU BOARD DATE TIME ALP NOIF EQU BRDID INF1 16MAY24 22:29:55 3 1 007-0-10-00 102 2 324 FAULTY TMU BOARD DATE TIME ALP NOIF...

Dear all! I made an ISDN trace of the incoming call and the result as below: Direction Station/PEN BCH Call Reference Message Type Time Incoming 1-2-1-0 177 (H'B1) SETUP (H'5) 16:04:38:040 ok 2368 "(Incoming SETUP (H'5) on 1-2-1-0)...

Dear all! Many thanks for your help I tried as Hipath4K help but it did not work I am going to test as Moriendi next week. Brs!

Dear hipath4k! Please see the below: DIS-SDAT:40200; DIS-SDAT:40200; H500: AMO SDAT STARTED ---------------------------- SUBSCRIBERDATA ---------------------------- STNO = 40200 COS1 = 1...

Hi everyone! My system is the OS4KV8. I have a ISDN trunk between the OS4KV8 and Toll pabx. All the calls are successful, both incall and out call works perfectly, but caller ID for inbound EXTERNAL calls does not show number of the caller, instead just only shows * sign. Please give me...

Hi Adibv and Moriendi! Many, many thanks I will to change those parameters when i come back my office. I am having 15 day off because CORONA virus. So i am going to enter that command later! Please wait me! Brs!

Many tks you, hipath4k! Please give me your help to lanpt2010@gmail.com tks a lot! Brs!

Dear Moriendi! These are parameters of TDCSU, COT, ODR... Please see: <DIS-TDCSU:1-1-1-0; DIS-TDCSU:1-1-1-0; H500: AMO TDCSU STARTED +------------------------ DIGITAL TRUNK (FORMAT=L) -------------------------+ | DEV = S2COD PEN = 1-01-001-0 TGRP = 1 |...

Hi Moriendi! Tks very much note that: Calls from the 4K'extensions are display correctly on DTS extensions, ATS extensions (belong to MD110) But not correctly on ISDN extension, add to 2 digits “00”. Eg it shows 0040100 instead of 40100 (I don’t want to display 2 digits “00” at pre) And note...

Dear all Many tks adibv, i will try to sign web page which you say Hi, Moriendi I Trace the MD as below: CTDEI:DIR=42600; CALL TRACE INITIATED ON DIR: 42600 EQU: 003-3-72-00 EQU: 003-3-72-01 DEVICE TYPE ITL PTR: H'013F MP-IN EQU MP-OUT EQU DEV...

Dear donb01 Many thank you for help Brs!

Dear Adibv! please you see attach file help me! where is Hista? I am new member about OS4KV8. Sorry you! Brs!https://files.engineering.com/getfile.aspx?folder=6b15394c-8a15-4d49-ac47-e3663cb4b00a&file=ASK1.png

Dear ADIBV! Can you say clearly? I only undersatand a liitle! I enter cha-diags command as you say. But not display corectly Please help! Thanks

Hi, everyone! I have got a Openscape4000V8 system,that has got 2 servers. I am new person about this system. I need to tranning about it. To learn it, what do i know the basic? how to learn it? And What AMO? Please introduce to me about the system: AMO,parameter, feature, function...detail How...

I have a tieline between an Ericsson MD110 and OPENSCAPE 4000V8 by ISDN Trunk. Extensions at the Openscape4000v8 (SIP,HFA Extension) call Extensions at MD110 (DTS, ATS, ISDN extension). Calls from the Openscape4000v8 extensions are display correctly on DTS extensions, ATS extensions. But not...

I have a tieline between an Ericsson MD110 and OPENSCAPE 4000V8 by ISDN Trunk. Extensions at the Openscape4000v8 (SIP,HFA Extension) call Extensions at MD110 (DTS, ATS, ISDN extension). Calls from the Openscape4000v8 extensions are display correctly on DTS extensions, ATS extensions. But not...

Many thank Inlsp05! You guide me to do it. You detail this problem! Please send my address mail: lanpt2010@gmail.com Cc: truongvv@gmail.com Brs!

Hi Inlsp05! Thank for your help! What is the cf? I only understand a little what you wrote. Can you say more clearly with the commands? You can write the steps, please! Step by step! I entered the command to check hardisk as following: <FISCP:IODEV=SYSDISK1; FILE SYSTEM CAPACITY DATA...