Search results for query: *

Need to configure a non-standard UDP port (not 514) for syslog. All the non-nexus gear has an option on the 'logging host' line to change the port or even protocol....is this missing on the nexus or just hidden somewhere else?? Thanks!

Anyone with experience with IRB bridging (+etherchannel) and active/active firewalls? My intent is to not use an additional switch between both our ISP routers, configuration will be as follows, however not sure if there might be some pitfalls (don't have equipment to test yet!): 2x Netscreen...

Designing a new datacenter network used for webserver hosting. Internet connectivity will be multihomed (we have our own AS) through two ISP's that will each give us two 1Gbit/s connections. The routers are Cisco ASR1002's with 10G backplane and 4Gb of RAM. The options I have been...

Hosting large amount of ecommerce servers sitting behind FW and F5's.

We are in the process of building out a new DC and we are looking into purchasing routers -or switches to support 4x 1Gbit/s ISP connectivity (two ISP's full BGP routetables). We are thinking about potentially using two CAT6503's (SUP720-10G) running VSS. Anyone got experience with this type...

That makes sense from what I am seeing in OTM. With that being the case though where do you tie together codecs and users (IP or TDM phones)with certain QoS markings? I still have a hard time believing that Nortel marks TDM-to-TDM (in essence media gateway to media gateway) voice traffic with...

While I have the ITG options in OTM they show up empty when selecting them. The vendor told me it's because this has been taking out of the newer versions as ITG is no longer used??? They had no explanation on what replaced it.

Sorry I said OTM but meant 'CS1000 Element Manager'.

Codecs configured are 711 and T38 FAX. I have access to OTM, however if you are referring to the 'VGW and IP phone codec profile' and its codec options none of them relate to QoS. Where do I configure this relationship??

We mark the traffic and the provider trusts our DSCP markings through the MPLS network. Latest response from the installer: Where the issue lies is that you are not seeing Diffserv 46, and we are using TDM phones, rather than IP phones. It is our belief, and XXXXX has had a discussion with...

Actually I am the network engineer responsible for the configuration of QoS in our network. What I don't understand is that fact that the vendor claims that in a TDM configuration the voice media is always marked CS5 across the trunk. While I can certainly mark this to up to EF on my routers...

Two PBX systems are communicating across a MPLS network, which does require QoS to deal with congestion and priority (LLQ). My question relates to the DSCP marking for voice media across the trunk (Nortel proprietary) between both CS1000E's.

We have two WAN connected CS1000E PBX's with TDM phones (no IP phones) on both sides. The vendor that installed the PBX tells me that the voice traffic between both will be marked CS5 instead of EF (expedited forwarding) and that this is how it works with TDM phones (IP phones will do EF for...