Search results for query: *

I was able to come across the US version of a10.00.50 software version and upgraded this morning. To my surprise, the voicemails are now coming in clear. The only portion that still has the noise issue is the recording for the voicemails and the actual auto-attendant. Reintinalized the trunk...

I wanted to update this thread, everything is in the same state as the last post. I don't remember if I had tried the CO card in another slot I will have to try that again. 4+4 for the trunk card 16DLCA and 8DLCA 4LCF card, are those SLT ports, not familiar with that procedure you suggested...

Side tone adjustment completed, still the same. Pulled the cpu blade and reinserted, also no difference. Any other ideas?

Problem is still present, running the side tone adjustment now. Will update when its complete. Yesterday I called vmsg from an internal extension and left a message on another extension. That message was clear. But still if calling from an outside line messages are noisy. That and the auto...

Just left a voice message internally and static isn't present, message is super clear.

Also want to clarify further. If calling in and line is answered everything sounds fine. Only when getting auto-attendant do you get the static, also if checking voicemail internally you can hear static from auto-attendant. Static also present in voice messages. I made a quick recording of line...

Thank you for that information. Quick question, after running a test on line one. DO you need to exit programming completely and go back in to do the second line? Or can you just go back to 90-68-01 after the completed test and run the second line there? Also for resetting the trunk blade...

I purchased an SV9100 used, system setup and working, I had an issue where calls would randomly drop both externally and internally. From what I saw on a forum post was suggested to update the software. Was originally on 2.0X. Upgraded the software to 9.0X and line dropping issue seems to be...