Search results for query: *

Dear all, to harden secure our PIX does it make sense to deploy a bridged F/W (pfSense, Astaro UTM ...) in front of the outside I/F of our PIX? Thanks in advance for any comment! Greetings, Rainer

Dear all, we are trying to establish an uplink to a Cisco 2960 (48 ports of Gb Ethernet and two 10 Gb Ethernet SFP+ ports). At the Blade site there is one IBM 10 GBE 850nm SFP+ Transceiver (CRU 44W4408) in the first slot of the CVR-X2-SFP and at the Cisco 2960 site we used the CISCO SFP+ 10 Gb...

SOLVED! Perfect, Dan THX, Rainer

Dear all, in order to revover the lost password of a 3110X switch we followed exactly the procedure described in Chapter 47 of this manual: http://www.cisco.com/en/US/docs/switches/blades/3110/hardware/quick/guide/1800801.html After releasing the MODE button we see these messages "Password...

Dear all, after allowing remote sendmail connections by setting the value of the local_only to 'false' ie #svccfg -s sendmail setprop config/local_only=false #svcadm refresh sendmail we have TWO sendmail processes called 'sendmail -Ac -q15m' and 'sendmail -bd -q15m'. For what reason I mean...

An addition: Is there a (lp?) command in order to find out all printing options from the PPD file? Rainer

Dear all, we have installed a Xerox printer on a system running Solaris 10 10/08 using this command: #lpadmin -p xerox_p -s localhost -v socket://IP -m uri -A write -n /usr/lib/lp/model/ppd/system/foomatic/Xerox/xr_p4500.ppd -o banner=always -I postscript -u allow:all The printer is running...

Just an information more: #lpstat -lp mps2_p printer mps2_p idle. enabled since Mon Oct 26 09:25:52 2009. available. Remote Name: mps2_p Remote Server: printer-s As one can see here the printer mps2_p is attached at the re- mote system called printer-s. I will not delete the mps2_p printer I...

@Annihilannic There is no /etc/cups/printers.conf file and there is NO mps2_p entry in /etc/printers.conf. Of course I mean #lpadmin -x command Rainer

Dear all, we are running a Solaris 10 8/08 Sparc system called 'test-s' where #lpstat -t shows such a line: system for mps2_p: printer-s (as lpd://printer-s/printers/mps2_p#Solaris) How can we get rid of this entry because #lpstat -x mps2_p says 'unknown printer'. THX for any help! Rainer

Dear all, we are using cups 1.1.20 on our Sparc running Solaris 10 5/09 where printers from XEROX and HP are to be used. By copying the XEROX .ppd files to /opt/sfw/cups/share/cups /model we are able to setup the XEROX printers via the GUI where we select the relevant drivers under the Model...

@Annihilannic: Got a hint to use udev rules. Rainer

Dear all, we are running SLES 11 where an iscsi tape library is attached. To load the tape in a slot we are using for instance the command #mtx -f /dev/sg1 load 2 which is doing very well. But after a server's reboot the device name of the loader is now /dev/sg4 or /dev/sg5 I mean it is dynamic...

We got it!!! An Upgrade to Solaris 10 x86 5/08 did the trick but don't ask me why. THX, Rainer

Dear all, during the 'make' procedure for Apache 2.2.11 under Solaris 10 x86 we see these errors: /tmp/apache/httpd-2.2.11/srclib/apr/libtool --silent --mode=compile gcc -g -O2 -DSOLARIS2=10 -D_POSIX_PTHREAD_SEMANTICS -D_REENTRANT - D_LARGEFILE64_SOURCE -I/tmp/apache/httpd-2.2.11/srclib/pcre...

@Mike: THX I got it by reducing the SGA parameter. Rainer

THX for the help. I put the "sessions" parameter in the $ORACLE_HOME/assistants/dbca/templates/General_Purpose.dbc file and now it is perfect. By the way: I tried also to install 11.1.0 on a Sun with only 4gb RAM under Solaris 10 10/08. I got the error ORA-27102 Out of...

Dear all, we have installed Oracle 11.1.0 on a Solaris 10 10/08 T5220 system and the DB server installs fine. When we try now to create the database by dbca the following errors at the "Completing Database Creation" step were seen: ORA-12801: error signaled in parallel query server P073...

@elgrandeperro: Do you mean in that case to have two A records with the same IP address?

Dear all, our problem is that certain MX/DNS resolutions are not working properly for external users trying to send us email. For example, mail users at yahoo.com are getting rejected when trying to send an email to us at "123@example.com". This mail is rejected as the user...