I figured it out. In looking at the number of drops I was pretty sure there was another culprit. What I tried was issuing the following command to the POLRE port:
switchport block multicast
Once I did that the camera and port instantly started working. I am now going to have to find the device...
So for a comparison I plugged the POLRE into a stand alone switch (nothing else running and not connected to any device). The camera worked fine and here are the stats:
GigabitEthernet1/0/3 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet, address is 0023.5d74.0683 (bia...
According to what I have read the uplink ports on the POLRE are 100 full duplex. The extender ports are 10 full duplex. From the spec sheet:
Interface: Ethernet Uplink (Trunk IP)
2 RJ45 ports: 10/100 Base-T auto-sensing, independent speed selection, Ethernet IEEE 802.3, CAT5 copper cable...
I agree on the speed setup and the duplex settings. I simply tried them as this POLRE wants 100Mbps and full duplex. I have removed those settings. here is the sh interface and some ping stats:
CCGRC#show interfaces gi1/47
GigabitEthernet1/47 is up, line protocol is up (connected)
Hardware is...
I have now run wireshark while the POLRE is connected to my 4510 to see if I could see any issues in transmission / receipt from that IP. Trying to open a web page on the IP I am seeing many tcp retransmissions, spurious retransmissions, and tcp dup acks. Unfortunately I am a complete newbie on...
4510 -
Currently Testing:
switchport mode access
power inline never
speed 100
duplex full
no cdp enable
Original Config:
switchport mode access
3750G:
switchport mode access
Hello,
I currently have a network consisting of a Cisco 4510r-e switch and a number of Cisco 3750G POE Switches ties together via fiber.
IOS versions:
4510R-E - 15.0(2)SG7
3750G - 12.2(35)SE5
For stand alone testing:
3750G - IOS 15.0(2)SE2
NVT POLRE 8 Port Extender
What's happening is when...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.