Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: lobk
  • Order by date
  1. lobk

    LACP configuration relapse

    You have a copy of your SMLT/LACP config?
  2. lobk

    5530 Flash

    How do you view what is stored in flash. The show nvram block doesn't have the image file stored there. So how would I look at it? I'd like to be able to do this when I TFTP a new image onto the box, make sure the image is there before rebooting.
  3. lobk

    Can 8600 modules be used in 8300 chassis?

    Can you use a 8600 card on an 8300 chassis?
  4. lobk

    LACP from an 8600 to a Juniper

    Has anyone configure LACP between an 8600 and a Juniper. I 'm not able to see the Juniper from the 8600. Is there some special setting like an 8600 to a Cisco for LACP? Thanks.
  5. lobk

    Controlling Multicast Traffic (8600, 450, 470, 4548, 5520)

    To ease the problem just enable rate limit for multicast trafic on the port. Then try and track down the problem. I'm almost willing to bet there is a loop, like one of the vlan got bridge over.
  6. lobk

    5520 + 8600 problems

    Reading your post it doesn't sound like you have SMLT configured correctly on your 8600. "Then I checked 8600 - vlacp is enabled, stp is ...forwarding for 1 switch. Then I disabled STP but - State is forwarding, Enable STP is false (...I did disable-enable port - no changes." On the 8600...

Part and Inventory Search

Back
Top