Search results for query: *

Screenshot from the manual for which I set up: Manual

In Entity Links, in the instructions I used to configure, tcp is selected as the protocol. But at the same time, they wrote that in the settings of the phone itself, you need to select UDP. With this setting, Session Manager does not respond at all to phone registration attempts. If you select...

In the first post I wrote what TraceSM gives out when I configure the phone for TLS. When I configure my phone to TLS, I change the Entity Link to TLS. My port is 5060. Everything is according to the instructions.

On this system - the first.

I have SIP only Yealink.

Thanks for the answer, tried it, it didn't help.

I am trying to set up a Yealink T27P SIP phone on the new Session Manager. I connected my CM to the System Manager. Synchronization passed, CM settings were loaded on SMGR. Session Manager passes all tests. Configured according to this instruction. Although it is for T22 and Session Manager 6.1...

Avaya Knowledge has a solution to my problem and it says System Manager MUST be equal to or higher version than Session Manager. Avaya Knowledge I have met this condition, but I want to try updating the Session Manager. I don't have access to asm-6.3.8.0.638018-installer.iso on Avaya Support and...

Thank you very much bignose21 and the rest for the answers, I will try to remove, unsubscribe about the result.

SMnetSetup prompted for a password to register after I entered the SMGR ip address.

Yes.

I have completed the renewal of the certificate using this instruction: [link ]https://support.avaya.com/ext/index?page=content&id=SOLN224890[/url]

initTM -f - same error.

Enrollment password right and not expired, but the error is different: Register replica node with System Manager DRS master failed. Thu Nov 18 20:13:15 VLAT 2021: Failed to initialize DRS. I wrote about this in the first post. Doesn't get to the prompt for a Enrollment password.

in Home/Elements/Routing/SIP Entities you need to specify the security module ip address. The installation manual say this is the eth2 interface of the Session Manager. On eth2, my ip address is 10.31.200.52. I indicated it in SIP Entities. Access Point Host Name/IP - SM1/10.31.200.50. They are...

Date/time match. Security Module should respond to ping?

Problem with Session Manager Security Module. Security Module status - Down. And the eth2 interface does not ping. I installed Session Manager from two disks: linux for ASM and ASM-installer. When I installed the first disk, I immediately configured the interfaces and checked the ping. All ip...