Search results for query: *

I do have port 7000 forwarded to the BCM (I missed a 0 in the original post). I will reboot the system after close of business today. All the ports are only set for UDP traffic.

Ok, Thanks for your time.

Set the Provisioned Public Address to the public IP of the router. The phone is still not registering with the BCM.

The IP address in the IP2002 phone (S1 and S2) are set to public IP of the cisco router. In IP Subsystem the Provisioned Public Address is blank. Just to be sure, does this need to be the internal address of the router or the public address?

Found it. It is checked now but still the same symptoms. Do I need to reset or reboot anything?

I don't see that that option. In System > Keycodes I see NAT Traversal/Remote Worker is active with data as 1. Did the license not load/register properly?

Yes, we have the NAT Traversal/Remote Worker license.

We have a BCM50 that we upgraded to 6.0 and want to use the Remote Worked feature with an IP2002 phone. The phone works in the office with no problem. We had out Cisco firewall configured to forward ports 700 - 7002 and 30000 - 30099 to the internal address of the BCM50. The phone was connected...