Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
BCM 400 call progress taking too long, ISP dropping call. Any timer settings to check?
Inbound call originates as a DID on a PRI into site B. B sends call to C over voip trunk, C sends it back to B over VOIP trunk because destination set C is set to Fwd All Calls to a number that routes it back over voip trunk to go out site B. I monitored both sides and it doesn't seem to take...- bwdavis
- Post #3
- Forum: Nortel: Business Communications Manager BCM
-
BCM 400 call progress taking too long, ISP dropping call. Any timer settings to check?
Hi I've got 3 3.6 BCM's networked together and set up to us H.323 voip trunks. Sites A, B, and C. There is a PRI connected to site B. Site A and Site C non-local calls route over voip to site B to go out. This all works. The problem occurs when someone at site A or C forwards their set to a...- bwdavis
- Thread
- Replies: 2
- Forum: Nortel: Business Communications Manager BCM
-
BCM400 3.6 flashing LED's on BFT...VM and nite mode down
Sounds exactly like what I just went through with a failed HD. I have three locations, and two of the HD's failed within 4 weeks of each other.- bwdavis
- Post #4
- Forum: Nortel: Business Communications Manager BCM
