Search results for query: *

Hi There Anybody out there know how to reset the admin user password for HMS 400 HPPROLIANT.... user ID : SuperAdmin Password: I lost the password, before every 4 months I used to changed the password as it appears but right now I misplaced it. Is there any procedure to reset it to default...

Hi I have concerns that after taking Sysbackup for CPDC SServer, In case of failure, after restoring the data from Sysrestore command do all data for SServer comes back including Element Manager configuration i.e, node config, .nai file, deployment tree etc. If not comes back do we need to...

I did this, but there is no change. But when I reach my DID extension thru Auto Attendant main greeting it is ok. After 5 rings transfering to mailbox. If I reach directly without Auto Attendant not transfering to mailbox. My DID-DOD IS R2MF Signallinig provided by vendor and HMS400Rv2.o is Sip...

Dear All DID / DOD incoming call from outside 260-7165 after 6 rings not going to voice mail from HMS400 R 2.0 HP Server If dials from any internal extension to DID extension 7165 after 6 rings forwarding to mailbox perfectly. In RDR DATA FNAD=HNT FNAL=FDN Ringing cycles=6 DFNR=6 In MPO DATA...

after installing loadware it works!!!!!!!!!!!!!!!!!!! Thanks

CS1kM single group system added new CPDC as EM+SS+NRS with 2 MC32s cards I allready register from CALL SERVER CPPIV to UCM reg ucm sys it ask primary IP address then permission granted and done.When I chk stat serv in LD 117 it says MC32s card status failed.And vgw ports all are disable. cannot...

Hi, Today 29 Feb 2012 some of our IP Tel sets 1150e date changed to 01 march 2012 instead of 29 Feb, and some tel sets remains to 28 Feb, regarding time it appears to be allright. On digital sets appears to ok, I checked the system and ISP 1100 Signalling Server date also appears ok.What could...

Hi, 1. I recevied 2 CPDC cards and 2 MC cards, and my call server is CPPIV NT4N39 Card for a single group system. 2. To install HMS400 sip based I want to know wether a dedicated CPDC card is required OR NOT to assign SIP gateway. 3.Another CPDC card I will configure as Primary sec serv...

I turned-on multi user and the problem is solved. thanks to kcflhrc, for your support.

NO, Multi-user is off thanks

Hi tre, CS1000M CPPIV Machine with Rls 6.0 single group, After log in to the system by TTY and do some changes in overlays 10,11, or 20 system immidiately log out. While giving prt command its is normal and I try to chg the trunk programming or CDB OR RDB OR CFN it stays longer it is...