Search results for query: *

So after like 40+ hours using dd to copy the image to the new Seagate ST380815AS I was able to get the cloned drive working in the BCM50. Thanks guys

Thanks guys, I have sourced a 80GB Seagate ST380815AS online, I think they had to reach to the bottom of the bin and blow the dust off it. I'm hoping that will arrive tomorrow, will try dd'ing the image to that and if it doesn't work I'll try the suggested tools above (I'm a Mac user and most...

Hi Firebrid, Yeah so my understanding is that dd against the block device will make an exact copy of the disk. I went for 500Gb as they are the smallest size 3.5inch disks available now. What was the brand and model of disk you have used? John

Hi Folks. I have tried replacing the Seagate Barracuda 80GB drive with a Western Digital Blue 500gb drive, I cloned the full 80GB disk to the 500GB disk and everything seems fine. However when I boot the BCM50, it fails to start with flashing orange lights, and an occasional flash of the lower...

thanks for all your help guys, this forum is a great resource.

Hi, I have a licence for two expansion cabinets, but none installed.

It seems that the content of my previous post was changed. The lic file only seemed to add # DPNSS Try-Buy 22 1 2016-08-02 and after applying it, I don't think it made any difference. If I have to go down the route of purchasing a 4X16 or 4GATM, would anyone recommend suppliers of used parts...

Thanks

I have not tried it yet, but I presume dd (http://serverfault.com/questions/4906/using-dd-for-disk-cloning) will work just fine and its free.

Firstly, thanks for the help guys - I'd be lost without this forum. On the HDD, will any 80+GB SATA drive be ok, or are there specific drives recommended. The site id (I think) is 001BBAFEB962. If its not possible to enable the 4 analog lines, my system seems to have a licence to add two...

Under keycode I see "IDLE - Int Analog Trunk - 0" I presume that means I don't have a licence for it? Can a licence be attained or is the PBX now useless to me? To your other question, PSNT into pair 1 (DN 061) btw, thanks for your quick response

Hi Folks, I am quite new to telephone systems and recently purchased a used BCM50 for a small office. I have two questions that I would appreciate a little help with 1) I have fully reset the BCM50 and have a number of stations configured and working, the BCM50 is plugged into a analog PSTN...