Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. D

    SV9500 modify Calling Party ID only for a Trunk where Routet by LCR

    Ok. What I was find in the Manual is the Following: ACNAL - Assign the Calling Number Pattern (CNP) on an Access Code basis. *When this command is used, assign ARTD command CDN66 to DC=15 So CDN66 is set to 15. I can try It with another number. But on the explenation of the help Text i don´t...
  2. D

    SV9500 modify Calling Party ID only for a Trunk where Routet by LCR

    No. I want to modify the number of the call initiator. The Calling Party ID. AADC/AADCL is working but modify the wrong number. It's modify the Called Party for outgoing calls. So if I call 3300 it's make 013300. I want that this to things for example: If I get an call from 3300 to the number...
  3. D

    SV9500 modify Calling Party ID only for a Trunk where Routet by LCR

    ACNAL is not set. Even if I set it the Calling number get not modified. The Trace you can make if you connect to the MG-SIP via Telnet or Serial and send the command show siplog. Best you then filter for a Time. Else the Output can take really long.
  4. D

    SV9500 modify Calling Party ID only for a Trunk where Routet by LCR

    Hey, I configured like you can see in this Screenshots. I also attached Screenshots of ASPAN and AFRSN for the Number 3300 that I am calling and the Route 3300. You can also see the Siplog of the MGSIP where the Pattern is missing. With the command ACPNCL its also not Working.
  5. D

    SV9500 modify Calling Party ID only for a Trunk where Routet by LCR

    Hi, on a SV9500 i have a Trunk to a Avaya PBX over a MG-SIP. Now i wont to modify the sending and receiving Calling-Party-ID and add two 00 before. I try it with the Commands ACNP/ACNPD and ACND/ACNDN but noting cahnge if I use them. Do you have an Idea what I make wrong?

Part and Inventory Search

Back
Top