Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Gbiv2018

    Configuring Avaya IP Office R9.0 With Gamma SIP Trunk

    Still went out of service after approx 6 minutes.
  2. Gbiv2018

    Configuring Avaya IP Office R9.0 With Gamma SIP Trunk

    If I change the SIP Network Topology back to "Open Internet", the DTMF works (set as inband).
  3. Gbiv2018

    Configuring Avaya IP Office R9.0 With Gamma SIP Trunk

    Tried the settings as TTT suggested and the trunk still goes out of service after a few minutes. Also, it broke DTMF. I will try upgrade to R9.1.
  4. Gbiv2018

    Configuring Avaya IP Office R9.0 With Gamma SIP Trunk

    Thanks GSmith93. Yes, I would like to look at the template.
  5. Gbiv2018

    Configuring Avaya IP Office R9.0 With Gamma SIP Trunk

    Thanks for the response however, I am still confused by where I put the different IP addresses that Gamma is giving me. Again, the SIP trunk will work after a reboot and allow inbound / outbound calling, shows the correct Caller ID on the far end, passes DTMF, etc. It times out and I think it...
  6. Gbiv2018

    Configuring Avaya IP Office R9.0 With Gamma SIP Trunk

    I am a new member but have benefited from Tek-Tips in the past. I am having trouble configuring Gamma SIP with IP Office R9.0 (Reference thread940-1766811) The provider gives 2 IP addresses, one for Signaling 5060 and the other for Media UDP. Where do I put the different addresses in the IP...

Part and Inventory Search

Back
Top