Search results for query: *

We have NuPoint 640e rls 14.1 (NPUM)... The port is in "unknown_state"... I would like to reset only this port ! Thanks in advance for your time !

...by typing the command "ip debug dis"... 2. You need ftp server connect to sx-2000. 3. From the SX-2000 (in maintenance)you type this command: sxtov *.dr.config.ms_bsc ms_bsc Then now you have a binary file, ms_bsc. Read this file with "HxD - Hexeditor" it's a free software... open it, you...

Thanks for reply quickly... There is the situation, we have 4 SX-2000 (LW 33.3) that we replace with ICP 3300 (MCD 4.0). Our provider did not use the "software conversion" because they had bad experience with it ?! Then what we do, is to print all forms from the SX-2000 and use the principal...

We convert an sx-2000 to ICP3300 Mxe, then I would like to retrieve the user speedcall of each phone... I don't find any form where the number are store. The only way I can see them, it's with OPS Manager... ops can read them ! But it's one by one and is very long... Somebody have an idea ...

Thank you guys for your time... Finally, I found that I can put a # at the end of the number: transmit "atdt *3324748,20750#^M" and then the phone system don't wait, the feature is activate right now! Jean-Pierre Work with MITEL system now (Meridian1 before)

Hi,I have here a very simple script : proc main commandmode on pause 2 transmit "atdt *3324748,20750^M" pause 15 hangup pwexit endproc The script is use to activate "Call Forward" on the phone... when I do this manually with the phone, I dial and I wait for the dial tone return, and...

Thank you to all of you guys! The way I find (with your help)to resolve my problem... With NRU, in the maintenance, I find the port of the extention, I disable and re-enable it, and the system detect the right model automatically. That's it That's all. Thanks again ! Meridian1 and Mitel...

I already try with user pref. in NRU but the model field is not available, is gray, I can't change it. I look for other number (not use) and the field is white, then I can change the model. May be there is something to do before the field be available?? Meridian1 and Mitel tech.

The problem: I have M7310 phone (ext. 21225) connect but not working properly. When I look into the config, I realize that this ext is configure like an M7208. Anybody have an M7208... What I would like to do, it's only to change the model. Is it possible to change only the model, or if I...

Thanks Knob for your time. I have now something that working for my "application". There is my final version... ;MW clear for all Poste Mitel proc main string MWLoff = "#43" integer num1 = 20101 string poste clear while 1 COMMANDMODE ON pause...

Yes, you have exactly the idea... My problem is to transmit the phone number. I can pass it string but not integer. What I have to do exactly is: -have diatone -dial #4320000 -dial #4320001 -dial #4320002 ... My idea is to create a small loop with "#43Poste" and increment the phone number...

I'd like to use script to deactivate feature code using the modem line. What I need to is a loop (while or for-next)... I give you an example in "my word" : x=20000 ;my first ext number ;I need to go off-hook WHILE "dial #43" x IF x= 29999 THEN ; 29999 is last number...

Now... the answer!! One of my contact find the problem. In the configuration of the "rout 16" (where incoming DID), the "NCRD" (network call redirection) should be YES. Thanks to everybody for your precious time!! Meridian1-tech

What is 6001 beside the CFW Key ?? Mail agent?? Meridian1 tech

...NO RCLS EXT DTRK YES DGTP DTI ISDN NO DSEL VCE PTYP DTT AUTO NO ICOG IAO SRCH LIN TRMB YES STEP ACOD 6994 TARG 01 BILN NO OABS INST IDC NO DCNO 0 * NDNO 0 DEXT NO SIGO STD STYP SDAT TIMR ICF 512 OGF 512 EOD 13952 DSI 34944 NRD 10112 DDL 70 ODT 4096 RGV 640...

Hi guys, there is here the scenario... I have 2 M-1 connect via TIE trk, I use CDP (steering code)to route the DN to the right switch... no problem! Now I have DID coming to the main switch and the call go to the console instead following the CDP routing. Somebody have an idea ? Thanks in...

I search for an interface (programmable) that connnect to a dry contact (alarm panel), can dial a number to reach a pager. When an alarm is activate, the "gizmo" have to call a pager to advise! Someone have already see something like that ? Thanks in advance! Meridian1-tech

I have something similar with MeridianMail... I also use Procomm. Example, if at the screen, an error append from the Mail, automatically the printer connected to my PC print this error. Then I realize that the mail was configure to print error at the same port that I use to connect. I...

I already have similar problem... I send the console to repair (test and clean) and after that, everything working fine. The console was "dirty", I suppose!! Good luck! Meridian1-tech

Thanks everybody for your reply... I will try and I let you know if I can make happy my customer. My client understand that is not possible to answer and transfer the call without using button on the console, it is just because the person at the console don't want to remove headset and put it...