Search results for query: *

Hello... So far on this guy I have figured out how to get it to work using local database for the users to authenticate against, but our goal is to authenticate against a radius server that we have in place for existing Juniper AP's. I have looked at some documentation out there and I cant...

...have a weird situation At one of our remote offices I was told to check out the network for slowness and this is what I saw on the switch stack *Mar 6 01:03:59.793: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to down *Mar 6 01:04:01.807...

Thank you unclerico.... you have helped me a lot

If I have two VLANS and two outside interfaces, and currently both are routing over a 10MB circuit. vlan 172 ip address 10.10.10.1 255.255.255.0 vlan 173 ip address 10.10.11.1 255.255.255.0 currently both are routing over the 10MB circuit 66.65.67.2 255.255.255.252 if I wanted to create a...

We just wanted to start playing with IPv6 get some of our equipment running on Ipv6. The main goal right now is to test the transition manual or automatic ipv4 to ipv6 tunnels. ATT hasn't denied us completely but I will work with ARIn to get a block on our own. Since we only have a couple...

I am new to this IPv6 stuff... We are looking to test that in our environment. The company I work for has a very small IT department we have about 250 network devices that includes switches, firewalls, routers, loadbalencers... we dont qualify for a /48 block from ARIN because of the size of...

No, the tacacs server ip is a different ip. I will need more ips in order to do this at least a /23 as mentioned by ADB100 Thanks

Hi All, We are getting ready to implement tacacs into our network, and I came to a problem. We have over 300 devices to upgrade running EIGRP. The subnet that I have been given to use for loopback address for tacacs source is 172.10.10.1 255.255.255.255 The problem is that I have to put that...

Those are some public NTP servers, how can I figure out what the authentication for those will be? Thanks

...sh ntp status Clock is unsynchronized, stratum 16, no reference clock nominal freq is 250.0000 Hz, actual freq is 250.0000 Hz, precision is 2**24 reference time is 00000000.00000000 (00:00:00.000 UTC Mon Jan 1 1900) clock offset is 0.0000 msec, root delay is 0.00 msec root dispersion is 62.36...

Hey... first off I had to add the tacacst subnet to the eigrp topology, and second I had to allow traffic to pass through our firewall on port 49. once all that was done everything started to work, I had to do some tweaking on the cisco config and the tatacs side but now works like a charm...

tatacs-server timeout 1 got it thanks

HI, I have figured it out thanks for the hints.. One lite problem that I have is that when I test my local database (meaning in case the tacacs fails) it takes about 30-40 seconds to come up, I understands that it is trying to connect to the two tacas server ips that are in the configuration...

172.30.1.61 is the TACACS+ server the tacacs source interface on the router is the 10.

...to connect to the host IT_LAB-TACACS+#term mon IT_LAB-TACACS+#debug tacacs packet TACACS+ packets debugging is on IT_LAB-TACACS+# IT_LAB-TACACS+# *Apr 11 18:55:17.531: T+: Version 192 (0xC0), type 1, seq 1, encryption 1 *Apr 11 18:55:17.531: T+: session_id 974847808 (0x3A1AFF40), dlen 26...

so do I

P.S. I am able to ping fropm the server to the remote router and from the remote router to the server... Thanks for any help

Hello We are deploying a centralized authentication method in our environment, and I am running into some issues with tacacs server. I have a router in out lab that is local to the network (meaning it resides on the same subnet as the tacacs server 10.10.250.0 network) I am able to authenticate...

Thanks for the base config!!! So quick question... are your usernames and passwords configured on the IAS Server? Our version of Server does not have IAS but I heard it has been replaced with NSP. I just have to figure out where to start.

If you dont mind me asking how does your config look like for the cisco router. I wasnt able to find any documentation how that would be configured on the cisco side. Maybe I am not looking for the right thing. Thank you very much!!!