Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. 5ascent0

    412 and DTMF digits for FAX

    Yes this can be done. We have been doing it since v 1.4 a PRI GFI Faxmaker and a MultiTech Modem.
  2. 5ascent0

    IP Tunnels

    Just set up an VPN tunnel between the two and place a VCM module in each based on the call volume. We have numerous sites running Cisco PIX VPN's with all calls coming into the central location and then being routed to the appropriate extension, etc. Most of our remote sites have DSL and we...
  3. 5ascent0

    password???

    We have a database that runs as a standard .mdb file. No mdw's anywhere. When we open the database, it prompts for a password, which we have and enter. However, F11 doesn't work, nor does any other attempt to view the tables. We have been running the database for quite sometime and would...
  4. 5ascent0

    506 to 501 VPN Confirmation

    I had zero experience with these things up until yesterday. My company manages over 150 tunnels for various clients and my Cisco Engineer went on haitus. If someone could list the commands that I need to enter by looking at my configs above I would greatly appreciate it. I no how to login...
  5. 5ascent0

    506 to 501 VPN Confirmation

    Since I am changing the IP address on the internal interface of each of the 501's, I will need to recreate the tunnels. Looking at my configs above, can someone write me the commands to delete the existing tunnels and bring them back up as new tunnels. I am assuming something will need to be...
  6. 5ascent0

    506 to 501 VPN Confirmation

    I get 0 for Total and 0 for embryonic when I did the show cry is sa.
  7. 5ascent0

    506 to 501 VPN Confirmation

    ...map BCL 31 set peer 69.34.173.14 crypto map BCL 31 set transform-set AES-256 crypto map BCL interface outside isakmp enable outside isakmp key ******** address 65.41.209.66 netmask 255.255.255.255 isakmp key ******** address 208.17.76.59 netmask 255.255.255.255 isakmp key ******** address...
  8. 5ascent0

    Packet Prioritization

    Is anyone willing to provide a config that will work? We will pay for it. It is for a client, and we are too swamped to address at this moment. I can provide complete specs on the network items involved.
  9. 5ascent0

    Packet Prioritization

    We manage a 10 node network with a 501 (DSL 768 both ways)at each remote site and a 506 (Dedicated T-1) at the headquarters. The 506 is plugged into a Catalyst 3750 with enhanced software on it (I think EIM?). Since we have our mail server sending traffice across the 506 and our Avaya VoIP...
  10. 5ascent0

    2970 and 3750G QOS and VoIP Priority

    We have a 3750G we just dropped in. Hanging off it are 2 2970's. I want to enable QoS, and set the uplinks voice packets to have the highest priority on the LAN/WAN. We have 1 2970 across a Tsunami 45 wireless connection. Everything has been working fine; however, I am concerned that a large...
  11. 5ascent0

    What would work best?

    I am going with a VCM 10 at both sides. It will be about an hour before I start the config. Had some other issues on the network. ...let you know how it is going.
  12. 5ascent0

    What would work best?

    No trunk or phone service exists at the 403 side. We are running the Tsunami 45 ptp link. So, all calls will need a vcm channel.
  13. 5ascent0

    What would work best?

    Will a single channel VCM card work, or will I need more? Does the unit create a Voicechannel for every user, including the digital users at the 403 side, when they are on the phone? If possible, could I call you if I have problems. I am a vendor in Vegas. ben@ascentsolutions.biz
  14. 5ascent0

    How to connect 403 to 406 through ethernet?

    No, I did not have a VCM1 in the 403. Thanks for the insight. I will have one shipped overnight. In the meantime I have a VCM 10 I can temporarily use. I don't need any licensing other than PMPro user licenses, do I? I can just point the 403 to the license server that the 406 is using.
  15. 5ascent0

    How to connect 403 to 406 through ethernet?

    Existing system is an 406, how do I connect the 403 using the ethernet ports?
  16. 5ascent0

    What would work best?

    Client had 10 2420 phones on the shelf so I will use them for most of the phones and 2 4620 phones for the rest. Also, they are bridged using a Tsunami 45 so the are all on the same subnet. How do I connect the 403 to the 406 using the ethernet ports, and how can I keep the users with the same...
  17. 5ascent0

    What would work best?

    Current Scenario: Headquarters with 50 2420 phones and an IPO 406 8 Construction sites with 2 4640 phones each Network is a Cisco PIX 506 at the headquarters and Cisco PIX 501's at 6 job sites. I have also deployed a Tsunami 100 (100mb full-duplex wireless bridge) that serves as a backhaul to...
  18. 5ascent0

    2.1 406 update failed...SYSTEM DOWN

    Thanks for all of the help. CrashTest1000 got us up and running. The default "password" was our major problem after getting the unit up the first time. Right now we are testing all of our remote sites' 4620 phones. So far all is well. Again, thank you everyone.
  19. 5ascent0

    2.1 406 update failed...SYSTEM DOWN

    I don't see any other choice. It responds to the at commands, but stops at the branch2 during a reboot. ben@ascentsolutions.biz
  20. 5ascent0

    2.1 406 update failed...SYSTEM DOWN

    United States

Part and Inventory Search

Back
Top