Search results for query: *

Thanks I plan on upgrading over the weekend. Just wanted to check, this is the first time that the system has rebooted on its own (installed 2 ½ years ago).

Hi everyone, Can someone tell me what the following error means: 1799232mS PRN: +++ START OF ALARM LOG DUMP +++ 1799232mS PRN: ALARM: 08/03/2007 13:05:42 IP 412 3.2(54) <TLB Data Load Error> CRIT RAISED addr=46414449 d=12 pc=009aa5dc 01cdbf1c 009b371c 00abb814 00abbb78 00ab3714...

Sounds like it is probably the provider blocking it. The service providers I have this working with are in the US, not sure if that makes a difference in the way PRIs work.

We have this set up on our IPO and it works well. For example, my extension is 4320. I created short code 4330, using the following parameters: Code: 4330 Feature: Dial3K1 Telephone number: 5557771212ss Line Group ID: 0 For the telephone number, enter the external number, followed by ss...

I don't have 3.2, but here's 3.1: www.catalysttelecom.com/downloads/IP_Office_Matrix_3-1.xls

Thanks. Installed the Fax Finder 2 port unit this week and it works great with the IPO.

I have 3.2 running on our 403 also with VM Pro, haven't run into any problems yet.

Hi, I am looking into a fax solution for our IP Office 412 (with T1 and PRI). We've looked at several products, including MultiTech's FaxFinder and GFI Faxmaker. I was wondering if anyone has had experience with either and if one is better than the other as far as integration with the IP...

I've noticed the same thing. In my case I have a VMPro call flow using an assisted transfer for Meet Me Conferencing. I have a 412 on 3.1.65. As callers dial in and are passed into the conference I notice the ?? in Call Status. Used to work on previous releases (I think 3.0), but since going to...

Are you running Exchange 2003 with Outlook 2003? Seemed to work fine with Outlook XP, but with 2003 didn't work, may be a few more settings that I may have missed.

I ran the update to 3.1(65) on both systems over the weekend and there was no change. As far as looking up the SCN sites in Sys-Monitor, I do see both. When monitoring the 412 site I see data for RIP Send / Receive Count and Advertised. When monitoring the 403 site all I see is data for RIP...

...0030 00 00 00 00 00 0f 00 01 01 00 31 34 37 32 35 38 ..........147258 0040 00 00 06 00 00 2b 2a 44 53 53 31 00 39 39 2f 61 .....+*DSS1.99/a 0050 3d 00 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 =............... 0060 00 00 00 00 00 00 00 00 00 00 00 00 00...

I ran into a similar problem last year with our IPO 403 & VMPro. It was also running off of a brand new Dell XP Pro w/ SP2. VMPro was the only thing running off of the machine and it would lock up every few days requiring a restart. We resorted to reformatting the hard drive and reloading the...

I would also like a copy. cms2045 at gmail.com thanks.

There are also a couple of settings on the Telephony tab under the System Configuration. Under this tab, make sure Inhibit off-switch calls is not checked and that Allow outgoing transfer is checked.

Thanks Dizzy, I'll give it a try. When I build the LCR would I leave the system shortcodes as they are?

Can someone steer me in the right direction with LCR? I have a PRI and a T1 hooked up to an IPO 412. We’re having higher than normal traffic inbound on the T1, so when someone goes to dial long distance (goes over the T1) the call does not go through. What I’m trying to accomplish is setting...

I'm going to experiment a bit more. I do have (now) all 3 services running off of the VM Pro Server. When I first installed IMS early last year, I did have the services split as you mention, but that caused nothing but problems. With everything on the same server, IMS seems to be more stable...

We don't use cached exchange mode. Should the logging levels be set to none, right now they are set to All? I'm assuming you're talking about the IMS logging levels in the Control Panel

Has anyone figured this one out? I have the same problem with IMS. Running a 3.1(56) system with Windows 2003 Server and Outlook 2003. IMS appears to be stable, even more so than before. When a VM message is left, it immediately appears in Outlook, but after reading/deleting the message, it...