Search results for query: *

I'm working with IT application System and everything seems to work fine. I've setup the connection and I've not enconutered the problem you report. Thanks for report. Bye

What are the main differences of this 2 tipe of boards= TLU64/1 and TLU76/1? In past, i did connect my BC9 system with asterisk machine via tlu76/1 and pri EuroISDN. Now, a customer with passive TLU64/1 board want to use it to connect with an asterisk machine, does it work exactly like a tlu76...

I need to find the scheme of the cable that connect the ipu and an external modem. I've something like this: MD -----> DB25 A1 3 A2+B2+C2 7 A3 15 A4 8 B1 2 B3 20 B4 4 C1 17 C3 6 C4 5 but it don't work. help me please...

YuhuuuuuI've solved it changing VARO: RODAI:ROU=01,TYPE=SL60,VARC=00000314,VARI=15400000,VARO=4E300000; Thanks Mirko

...remain suspended anda after 10 second it disconnect. the extension on MD side are 5xx and on BP side are 2xx. My configuration on MD side is: *********************************************************** <rodap:ROU=ALL; ROUTE DATA ROU TYPE VARC VARI VARO FILTER 1...

...the hardware with command: SFCEI; Afret all I unblock the LIM with BLLTE:LIM=1; Now, the CNLIP:LIM=1,DEV=YES; command report this output: **************************************************** <CNLIP:LIM=1,DEV=YES; LIM CONFIGURATION LIM NUMBER 1 LIM CONTROL LIM CONTROL...

Excellent whosrdaddy, with parnum=9 it work. many thanks :) Mirko

Ehm... I Think you're speaking about a newer version of system than bC9, in my documentation I've see that the only valors valid for PARNUM 56 are 0-9 and 15. In newer version (I've see it on alex with BC12 docs) what you say it's possibile but I'm interested to know if it's alredy possible in...

Is it possible to start A conference using the code "3" with a digital phone system in BC9? I'had try but nothing happne, I can only start conference by programming a key but with the analogue telefhone che code "3" work fine. Any ideas? Bye Mirko

Is it possible to configure a passoword for operator consolle in order to make night/day switching controlled by password? I've not find anything about this possibility. Thanks Bye

Excellent, after the installation of ILP on lim 3, it semmes that the ICU work and the command ICFUI has result executed. Now I onli wait tomorrow to try if everithing works. Many thanks Bye

I Have try to do it with: *************************** <ICFUI:ICUIND=2,EQU=3-0-20-00,RATE=9600,DFMT=4,UPDFCN=YES,PARITY=NONE,CCHECK=YES,TXC=NO; NOT ACCEPTED ILP PROGRAM NOT IN LIM *************************** But nothing :( Bye Mirko

...try with CNPIP:UNIT=ILP; for remove the ILP programming from LIM 1 and then to reinizialise it on LIM 3 but it don't Work. here my configuration: *********************** <CNPIP:UNIT=ILP; PROGRAM UNIT INFORMATION PU-NAME PU-NO PRODUCT NUMBER REV PATCH ILP...

Uhmmmm.... It's some week I'm here and many times I hear speak about Alex, What does it is? For the documentation, I use Dynatext with the BC10 documentation and the Italian part (for the configuration of the lines). But Now i'm curious of what this fantomatic Alex is, someone can tell me? And...

Yes, what you say is very usefull for me. Now i've Understand that the 101 that I see in the first special number is in effect the Trunk 1-1, everithing is now clear. Many thanks Mirko

...SPEXI:DIR=1202,OPT=N,NDC=113; because if I do it, the user can see 113 on display and he don't wont to see it :S Some Ideas? What does it mean *0*101#113 that is the code now assigned to 1202? I'm not sure it's the original one because I've changed it some days ago without note the older...

Nothing, I've sole it :D Thanks Byes

Hi all, I've an ALU-2 board and I need to create an alarm only when the voltage on AL goes down. I'm capable to open an alarm when I receive the 48V on my input port, I had done it with the command: ALEII:BPOS=1-1-20,ALI=1,CODE=801,TEXT=ALLARME1; But What I need is exactly the opposite...

Many thanks THIS is what i'm searching for, simply I search for the incorrect name :D Bye Mirko

Does exsist fictive number in Md110 BC9 System? And if yes, I've found nothing about it in documntation, what I've to searching for? I need to inizialize a fictive number and then I will program the suprvision of fictive on the keys of 2 digital phone so they will ring together. Bye Mirko