Search results for query: *

Thanks for the help. I figured it out after an hours of struggle.

try to change the speed to half-duplex, usually it'll solved the problem.

Thanks. I guess i was annoy by that line. But when I run a test on www.dslreports.com i got: down: 1411 up : 1393 I guess this is an OK number? Thanks

hello everyone, I was able to configure cisco 1720 to get online via a full T1, however, the internet keep dropping every 5 minutes. I have to turn off the cisco router in order to get online. any idea? T1(WAN) 69.19.251.20 255.255.255.252 Subnet Address 69.19.251.21 LA Bridge...

I order a full T1 line but why is the Serial0 showing it only fractional T1. is there a way to make it a full T1 line? Serial0 is up, line protocol is up Hardware is PQUICC with Fractional T1 CSU/DSU Internet address is 69.19.251.21/30 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec...

Hello everyone, I a newbie to this Cisco 1720, and was able to configure the Serial0, and FastEthernet0. My ISP gave me this block of IP address. T1(WAN) 69.19.251.20 255.255.255.252 Subnet Address 69.19.251.21 LA Bridge 69.19.251.22 LA Bridge CPE Router (WAN) 69.19.251.23...

yes, both block if IP address were assign by the ISP

yes, both block of address is assign by the ISP.

It still not working. Do i need special cable like RJ48 connect from the wall to the router?

Hello guy, I've been struggle with this router. I don't seem to get it online at all. All i need is to be able to get it online. I've got this block of address from my ISP which is LABridge.com I'm a newbie to this Cisco 1720, if you can guide me all the commands to get this box working, I...