Search results for query: *

I wasn't sure if the subnet would be a problem, so I corrected that problem. Didn't have any affect. The strange thing is on the 10.1.10.1 switch (with the svi's) you can ping any .255 devices. Telnetting into any other switch you can't. But you can hit the 255.1 svi on 10.1.10.1. I am not sure...

I have 5 vlans 10, 102,103, 104, 255. Am able to ping/connect between all vlans except from 10 to 255. From 10 vlan I am unable to ping to any devices on 255 but can hit the 255 gateway. From the 3750 configured with the SVIs, I can ping the 255 gateway and all 255 devices. From any other...

Am running into trouble trying to enable the dhcp server on a 3750 switch. I want to enable dhcp only on vlan2. Here's a quick copy of the some of the config switch 1 provision ws-c3750g-48ts switch 2 provision ws-c3750-24fs system mtu routing 1500 ip subnet-zero ip routing ! ip dhcp pool...

Thanks, all buildings have MMF connections, and all are at 100FX. The distance between buildings is a factor, and was unable to convince the powers to be that we should TDR the fiber to determine if 1GB is possible. However, I do have 1GB SX SFPs if I find out it is possible. I am hitting the...

So svi's are created only on 3750. Only thing to do on 2960s is to setup vlan ports, and trunk port to 3750.

I am comfortable with creating the VLANs and interVLAN routing on the 3750. I am still just a bit confused when expanding out to the 2960s. Would using trunking ports connecting each 2960 allowing all vlans do this? Your idea of alternating routing sounds good, at least there would be some...

I think I am getting this. I think am getting this. How easy using svi. The gateway for each host on the vlan. What is needed on the 2960, I am a little confused - just need to add ports to the vlans? Another question There are 2 buildings each of which has other buildings connected, not...

I appreciate the quick responses here. The question is more on programming examples and implentation. I am reaching out to those in my organization, as well as on here, to assist. The problem is upgrading a L1 network to L3. The current network, not my design, is a single subnet -...

Am taking over a project and am looking for some additional advice. Flat network 192.168.255.x being upgraded to L3 with 3750G's (core) and 2960T's (edge). Fiber trunks between all switches. It is a star network with fiber trunks between switches. Will need to setup 5 vlans: vlan100 - servers...