Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Disk pool utilisation
Hi, We use a disk pool as cache which directly migrates to a tape pool. Backups start at 3:00 AM and the cache is used. We now would like to know the max utilisation in % the disk pool was used during the backup. The standard report only shows the utilisation at the moment the report is run...- bbroeders
- Thread
- Replies: 1
- Forum: Data Recovery
-
How to expand the diskpool
Hi, We have a TSM setup on AIX with a diskpool as diskcache which migrates to the tapepool. We want to expand the diskpool with some extra storage. The extra storage is now added to the volume group and we are ready to add it to the logical volume "tsmdisklv". Do we have to stop TSM before...- bbroeders
- Thread
- Replies: 2
- Forum: Data Recovery
-
How to migrate to new san switches
jjjon, Yes we do wwid zoning and hosts are connected to both zones. But to save on initiators we zoned one SP per fabric for hosts so some outage will still happen. I was wondering, do we have to make the new switch principal before powering down the DS24M2 or after or will it become principal... -
How to migrate to new san switches
Hi all, we have at a remote site 2 DS24M2 switches each being a seperate fabric and connected over nishan 1620's to other site's with other fabrics. We want to replace the DS24M2 switches at the remote site with ED140M switches. The ED140's will fully replace the DS24M2 so all local storage and...
