I have a raid 5 array that I need to replace a drive in. I've tried several 73GB drives but their configured size once in the machine is 70007mb. The maxtor drive that needs replaced is 70024. so my question is, is anyone else running this drive or any other 73gb drive and could they check to...
Can this be done? It gives me data loss can occur error when trying to do it from windows. Can it be done in a dos or bios mode or booting from the cd or is it more related to windows not recognizing the new array size? It's strange that NT supports it but windows 2000 doesn't.
I have seen this when we were setting up smtp redirecting. This usually means that someone it trying to send mail to your mailserver which is inside your network or some similar service and you don't have the redirecting rules setup. once they are setup you should not get this error unless you...
I'm looking to setup a 3 site vpn over t1 internet connections
Site A:
Full T1 Need 15 vpn connections into this site and web access for all persons inside the network
Site b:
DSL 764 with need for 5 vpn connection and internet access for all persons inside network
Site c:
T1 with...
VECLFRout#sho int bri 0/0:2
BRI0/0:2 is down, line protocol is down
Hardware is PQUICC BRI with U interface
MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec, rely 255/255, load 1/255
Encapsulation PPP, loopback not set, keepalive set (10 sec)
DTR is pulsed for 1 seconds on reset
LCP Closed...
Building configuration...
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname VECLFRout
!
enable secret 5 $.
!
username g
username g
no ip subnet-zero
no ip domain-lookup
isdn switch-type basic-ni
!
!
...
I'm setting up a 2611 with isdn u type wic card and am unable to bring the second channel up.
I've tested just calling into the second channel and I get the same error when dialing just that number.
The debug isdn q931 shows the call coming in but when the router sends the connect back it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.