Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Fiber channel tape drives not being detected by Netbackup
I've tried that already and the /dev/rmt directory is still empty? Take a look at these logs and tell me what you think. This is after a reboot -- -r: Dec 23 08:47:21 psbkups1 reboot: [ID 662345 auth.crit] rebooted by root Dec 23 08:47:21 psbkups1 vmd[228]: [ID 715111 daemon.error] volume... -
Fiber channel tape drives not being detected by Netbackup
No, they do not show up in the /dev/rmnt directory? I've tried doing the Netbackup sgscan command and only the internal disk and robot shows up. As far as the st.conf, what entries should be made? I always thought it was done automatically with the OS install as long as the devices were... -
Fiber channel tape drives not being detected by Netbackup
There's 4 fiber connected LTO tape drives connected directly into a Sun 220R with two dual FCAL cards. I done the show-devs command and can see the cards: /pci@1f,4000/pci@5/SUNW,qlc@5/fp@0,0 /pci@1f,4000/pci@5/SUNW,qlc@5/fp@0,0/disk /pci@1f,4000/pci@5/SUNW,qlc@4/fp@0,0... -
Fiber channel tape drives not being detected by Netbackup
We just recently purchase a StorageTek L180 tape silo with 4 fiber channel tape drives. The tape silo is attached too a Sun 220R running Solaris 8 with the most recent patch cluster. For some strange reason when going through the netbackup setup wizard only the robot is being detected. I've...
