You may be able to reassing the IRQ in CMOS setup. When I installed a NIC it always placed on IRQ #10 with my video card and USB host controller wound up on IRQ #3. The system would hang on the Windows is shuting screen and could not self-boot or auto reboot. By BIOS is manufactured by American...
If you are unable to print from the PC because you get an error message such as unable to print toLPT1 or "Communications error check all cabling and try to print again", what should be the first solution to resolve this issue? Should you first print a self test, and if successful...
You might try running the DOS command IPCONFIG from the command prompt. This should display an IP configuration window with your adapter address and IP settings. <p>Ross Oldham<br><a href=mailto:tanker1@gte.net>tanker1@gte.net</a><br><a href= > </a><br>
If you are using an internal modem be sure to disable a com port in CMOS (com1 for IRQ 4 or com2 for IRQ 3) the install it as a PnP device when Windows 9x starts. <p>Ross Oldham<br><a href=mailto:tanker1@gte.net>tanker1@gte.net</a><br><a href= > </a><br>
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.