Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Varmit57

  1. Varmit57

    Call record button announcing that the call is being recorded after update?

    Thanks for the quick response, That was it!
  2. Varmit57

    Call record button announcing that the call is being recorded after update?

    I think since the latest update when you hit the call record button it now announces to all parties on the phone that the call is being recorded. We live in a one party state and this is not needed or wanted. Is there a way to shut that back off?
  3. Varmit57

    406v2 Static/Squelch on IP phones?

    The that it is mounted in is grounded + I have another ground conneted to the back of the main unit. I have upgraded to 4.0.12, This started back in 3.1, I have upgraded software 3 or 4 times.
  4. Varmit57

    406v2 Static/Squelch on IP phones?

    OK guys, This is still a issue for me. Its alot better then it was but it is still there, just shorter then it was in the past. Any Ideas?
  5. Varmit57

    Startup Banner

    What is this for & where would this display? I'm looking for something to hide the "* to Program" option.
  6. Varmit57

    406v2 Static/Squelch on IP phones?

    OK for the most part I thought this was fixed. This morning I was on the phone and heard it again. It was very short and not as often so it seems to be a lot better but still a issue. Have any ideas what I need to check next? I'm downloading the update to 4.0(14) but don't have much...
  7. Varmit57

    406v2 Static/Squelch on IP phones?

    Sorry, I ment to give you both one. This issue has been a thorn in my side for a while.
  8. Varmit57

    406v2 Static/Squelch on IP phones?

    It seemed to have fixed it! We run two diffrent call centers in this building, so I have specific times when I can restart the phones system. It was on the long distance calls only. Thanks for the help!
  9. Varmit57

    406v2 Static/Squelch on IP phones?

    OK I set Fallback but I can't restart it tell later tonight to see if that fixes it though. Thanks for all the help.
  10. Varmit57

    406v2 Static/Squelch on IP phones?

    Does it matter which one?
  11. Varmit57

    406v2 Static/Squelch on IP phones?

    Both my PRI's are set on Network? One handles long distance and is connected to one T1. The other is for local calls and is connected to a diffrent T1.
  12. Varmit57

    406v2 Static/Squelch on IP phones?

    Just had a user stop in and say that it is almost all incoming long distance call and they are on a digital phone, not a IP phone? We have an AT&T T1 for thouse calls.
  13. Varmit57

    406v2 Static/Squelch on IP phones?

    On all my IP Phones there is a 1/2sec. squelch/static sound about every 5 to 10 minutes. I'm having a hard time getting any hard evidence on when it happens. I have a 406v2 with two PRI cards, a 30 port VCM, An analog 16, a Phone 8, and 2 digital 30 modules with about 45 IP phones and 75...
  14. Varmit57

    Cisco 800, Dual DSL, Load balance?

    Has anyone used any of the 1800 series with this application?
  15. Varmit57

    Cisco 800, Dual DSL, Load balance?

    Asynch I think. How do I connect both Modems to the Router? Do I use a switch or can the auxiliry port be used as a 2nd WAN port?
See more

Part and Inventory Search

Back
Top