Recent content by trmg

The digital line cards use the first 16 pairs. Pair 1 is TN 0 and Pair 16 is TN 15. They are in sequential order.

Hmm. I will play around with it and see if I can eliminate the virtual set.

For reference here is the set configuration. This allows calls to x3094 to "roll up" to x3095 and then to voicemail if both SCRs are busy. Same for x3096, "rolls up" to x3097 and then to voicemail if both are busy. I left some space inbetween in case I want/need to add additional SCRs to each...

OK I built an i2004 (2004P2 specifically) using TN 80 15 and it looks like this may do the job.

So, that's what I originally tried as I have superloop 112 defined as a virtual loop for IP phones, but I get SCH1942 [Virtual Terminal must be defined on a phantom loop (Overlay 11)] when I specify one of the TNs under superloop V112 (TNs 77-80). Maybe I'm picking the wrong set type for this...

The reason for the virtual set is because I want to control the hunting and forwarding independently of the sets these SCR DNs appear on. There are a couple of threads I stumbled across that seemed to hint a virtual set is a way to achieve this, but it's unclear on if they were successful...

Hello! I have a Meridian 1 Option 11C running CS1K 5.5. I am attempting to configure a virtual set that is the MARP for a group of SCRs. The idea being that I can configure them on the virtual set and leverage line key hunting (LHK) to hunt through them regardless of how the physical set are...

I have a NT1R20AB OPS Station card and am trying to get hook flash disconnect supervision working. I *think* I have the TNs configured properly with the most important bit being FTR ISP. Below is an example TN. DES MODL21 TN 004 0 00 00 TYPE 500 CDEN DD CUST 0 ERL 00000 WRLS NO DN...

Yay, it seems to be back.

Does anyone know what happened to (or is happening with) pbxbook.com? It seems it's returning 404's. I'm hoping this is temporary as it's been an excellent site I reference for a lot of my BCM and Meridian 1 shenanigans.

Thanks KCFLHRC. I did skim the feature guide but must've missed that blurb. However, it's what I expected. Thanks for the confirmation.

Is it possible to invoke centrex hookflash via SPRE (SPRE + 96) from a digital station? I have an M2008 that I'd like to be able to do this from, but don't have any available buttons to program one as "THF". I've figured out how to use other SPREs, but not centrex hookflash (if it's even...

Hello All, Recently I started getting periodic spewings of AUD083 to the console of my lab CS100M. Seems to happen sporadically but at least once a day. They typically look like this: TIM000 07:35 15/11/2021 CPU 0 AUD083 00320076 00000C87 00000000 0000C000 00000000 00000F01 00000000...

It's running CS1000 5.5.

I have a CallPilot 202i running 05.01.04. I have a SIP DID routed to CallPilot and am using Asterisk as a media gateway (QSIG T1 to the Meridian). When calls are forwarded to the DID, the diversion/redirected number comes through but is prepended with a star. So CallPilot answers with "You...