Recent content by RuralHospital

Hey thanks for the suggestions. CoralTech: I just received a quote to replace this current IPK system with an NEC SV9100 system. All the components are used except the CPU will be new CP20 BLADE - SD-B2 8 GIG SD Card with INMAIL. The quote comes in a little under $10K and I'm thinking that...

Thanks for the replys. As I understand it NEC is discontinuing the SV9100 and will be only be accepting purchase orders until the end of this year (2024) If we were going to stick with an on-premise system and keep our Cat 3 cabling, what switch can you recommend ?

Can anybody please comment on a possible upgrade path from an old NEC IPK-I installation to a later NEC switch? I was told that in some cases it's possible to continue using the PBX station units with an upgrade to the SV8100. If anyone is interested in making me a quote here is the current...

Hello out there. Is anybody supporting the old IPK-I switch these days? I have a facility out here in Montana that is still running one and could use a tech.

Well I used the same slot, were the DTI-U30 ETU (T1) was, for the PRI-U20 ETU. I used the SAT software to modify the IPK program to replace the DTI with a PRI card, with the Wizzard feature as a guide. I then uploaded it to my test switch and got the message "Layer 1 Down: COxx Layer 1 DOWN"...

Thanks, DoubleDriveLine. The switch is currently on a T1 so I think the clocking card it has now will also work with PRI ? Wondering if there is a command to turn on Caller ID or if it automatically comes with PRI. I don't see anything in the manual about that...

I think I found the answer to my TIE question in your notes: 10-03-10 System 0 = Slave 1 = Master Leave as Slave: the IPKII does not support a Point to Point ISDN connection Thanks for posting those notes!

Hi gbtac3, Thanks for the quick reply. Looking through my manuals I see that those commands for for the IPK-II. I'm running the IPK-I so the commands are different but I will reference your outline against my IPK-I manual. One thing I am wondering: Have you ever heard of using PRI interface...

Hello Everybody, I've been managing an IPK-1 system for about 12 years. ( IPK-I, pk192, R4.2sw, T1 DID, COI, 48 PBX stations, 48 SLI stations, Elite Mail ) It's an old system but it's been completely reliable and the staff is satisfied with it except that we need caller ID and our Telco says...