Recent content by rrizzojr

Thanks for your input however the corrective action was found under "Route Filter" to include the "Area Codes" required.

Ok let me start by saying I am new to Cisco Call Manager. I am not quite familiar with it yet. Today we confirmed that we can Call the number we want to forward too from this particular extension that we want to forward from. This tells me that this extension does allow calls outside the local...

We inherited a customer that has CCM 8.6.2. When the end user tries to set up call forwarding on his 7960 series phone 1)Presses Call FWD All 2)Enters in a 4 digit Internal Extension 3)Presses End Call Phone now shows Call FWD to XXXX If another internal extension dials the extension that...

I inherited a project with an OLD Cisco Call Manager 3.3 System. The site topology consists of 2 CM Servers one in NJ and one in NY. There is a P2P T1 between sites. The publishing site had an old Windows 2000 domain controller which was the FSMO holder for the domain as well as...

I apologize. I read through it quickly and the USB part went right over my head.... Here look at this article http://support.veritas.com/docs/276904 see if this helps. Have you tried stop and starting BE Services while the drive is connected to see if it comes back online? If it does you may...

Sounds like a credential issue. See the info from link provided. http://support.veritas.com/docs/266177

It's understood that you have the same systems which leaves me to believe the OS is same and backup 12.5 is installed on both. However its unclear as to whether the tape drives are identical as well. What tape drives are you using and are you using veritas drivers or the tape drive vendor...

If you haven't already it is highly recommended that you use Symantec Veritas Drivers for the tape drive unit and not the hardware vendors drivers. Have you seen the document below yet pertaining to your specific error? Document ID: 302992 http://support.veritas.com/docs/302992 E-Mail this...