Recent content by RahjiSupreme

Here is an example Phantom DN. Sometimes they work better than the ACD with NCFW. Just in case you ever need it. REQ: PRT TYPE: TNB TN 156 0 0 0 DATE PAGE DES DES CFXA TN 156 0 00 00 PHANTOM TYPE 500 CDEN 4D CUST 0 WRLS NO DN 6115742 0 MARP AST NO IAPG 0 HUNT TGAR 1 LDN NO NCOS...

My issue is with the firmware. If I IDU before the firmware upgrade, it works fine. After the firmware upgrade, IDU does not work. The 3903s currently use flash firmware version 36, which does not support Corp Dir. My PBX updates them to flash firmware version 88, which does support Corp...

Create a Phantom Port (500) set in LD 20. DTR DCFW 9npanxx to call the external number. You can test it by dialing the Phantom DN. Then point the app builder to transfer to the Phantom DN you created.

Last night I installed some M3903 telephones for the first time. I updated the firmware(FDLU) and all features are working. The only problem is, I can't IDU the M3903 telephones. Is there anything special I need to do to allow me to IDU the telephones? When I do a FSUM, I can see the...

Thanks for the CALP TER suggestion, but that did not work. It still says "npanxx" does not subscribe to the service. Let me know if you can think of anything else to try. Also, I was able to get it to work when I FNA to a non ISDN then have the non ISDN forward to the PBX (As tnphoneman...

NARSBARS, The incoming trunk restrictions? Please elaborate. First, let me explain a little more my scenario. I have remote sites not on a PBX, simple 1FBs. A customer calls my remote site, my remote site is not available, the LEC does a Forward No Answer after 4 rings to a TF on my Corp...

If anybody still has this issue, the SDN fix does work. However, if you are like me, and your calls are forwarded from several "hundred" numbers, then you need another solution. I don't want to add a SDN for each number forwarded to my CallPilot (and I don't know if it is even possible). I...

I really don't want to implement a feature like this either. I was just doing my due diligence. The request did come straight from the executives, so all I can do is advise them of how bad an idea it is. Ultimately, they sign my check... Anyway, I use SECC not the full blown Symposium. I'm...

Does Nortel offer an Anonymous Call Rejection feature? I couldn't find it in any NTPs. If it is available is it a trunk feature, or programmed by telephone, and how do you program it? I have a 61C running Rls 4.5 The reason I ask is because my executives decided they do not want to answer...

JNJRBOE- DID YOU EVER FIND A SOLUTION FOR THIS ISSUE? I AM HAVING THE EXACT SAME PROBLEM. I HAVE REMOTE SITES THAT FNA TO MY OPT 61C. CALLS RING TO THE EXTENSION FINE, BUT WHEN THERE IS NO ANSWER CALLPILOT SAYS MAILBOX NPA-NXX-XXXX DOES NOT EXIST. THIS IS A HUGE PROBLEM, BECAUSE I HAVE...

Thanks, I guess my problem then is my IFC. I need NI2. I will ask the LEC if this is an option for them, since they are the controlling switch.

IFC is D100 and D250, but I thought this had to match the far end switch. I actually asked one provider for NI2, but they said they couldn't. That one had to be configured as D250. The other D100 was built when I started here.

I forgot to mention I tried that, no names show. However, I thought there was something special required to see the name on the MSGI. Are you aware of a download or patch for this?

Can anyone tell me how to configure inbound calling name on PRIs? I'm running rls 4.5 and I do have my dchannels configured as ND2 and my routes configured as NCNA Yes. Using 2 different providers, both say they send name. I don't see name on my telephone sets (cls is TDD, CNDA), I only see...

MondoMan3, Unfortunately, I did not get a chance to make the changes. It's still on my to-do list. I'm preparing for an upgrade from 3.0 to 4.0. You can print the packages in LD 22, but I'm not sure what the difference is in the basic and advanced QSIG. Anyway, I figured if I can get this to...