Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Rabbott

  1. Rabbott

    E1/T1 mixed system

    john, mg2005 thanks for all your help!
  2. Rabbott

    E1/T1 mixed system

    thanks MG2005, have you seen it working the other way around? the T1's providing clock for the E1s?
  3. Rabbott

    E1/T1 mixed system

    So I shouldn't be worried about clocking T1s from an E1 or viceversa? It should work both ways?
  4. Rabbott

    E1/T1 mixed system

    I would like to know if you can have a Meridian 81C using E1 and T1 links (NT5D97 and NT5D12). If so, is there a recommendation on which one should be used for clocking? Thanks to you all in advance.
  5. Rabbott

    ISDN link between 81C and Periphonics VPS

    John, they told me it is a Meridian 81C, release 25.40. This is what I got from our switch people for the dch configuration: ADAN DCH 43 CTYP MSDL GRP 1 DNUM 1 PORT 3 DES IVR-LOOP-59 USR PRI DCHL 59 OTBF 32 PARM RS422 DTE DRAT 64KC CLOK EXT IFC NI2 ISDN_MCNT 300 CLID OPT0 CO_TYPE STD SIDE NET...
  6. Rabbott

    ISDN link between 81C and Periphonics VPS

    I have been trying to setup isdn between a Periphonics VPS release 5.4.1. These are the cards we have on it. ======================== Phone Line Manager Parameters ======================== Voice Processor image..................(plm zvpobj file) vpc VPLC-1000 default image......(plm card vplc...

Part and Inventory Search

Back
Top