Recent content by plokijuh

Thanks for the additional info Moriendi. I'll check with Assistant RDS's and check all of the COTs I have to be sure what exactly cause the problem.

Hi guys. Problem solved. And this is what I did. I added LINC to the COT, which didn't help and changed LODR with no result. Moriendi pointed that the problem is somewhere in the flow, so I decided to switch the COT completely. I change COT=251 to COT=90, and leading "+" sign (prefix) gone...

Thank you very much. I'll check and write back.

Hi guys. Yeastar is connected with OS4000v8 via SIP trunk. Whenever I call any Yeastar Subscriber from an external number I get a "+" sign before the number like this: +000 450-27-20 I use this LODR ADD-LODR:251,,,,ECHOALL; ADD-LODR:251,,,,END; ADD-LODR:251,,,"Yeastar"; I would be grateful...

Thanks for the answer Moriendi. I don't really know what I was doing wrong before, but now everything seems to work as I expected. These different names sometimes drive me crazy. The same option may be called differently in other commands. It is difficult to get used to it. Anyway, what I...

When CHANGE-DIAGS:COMP=CP2,S05=ON; I got this F4066 M8 N0072 NO ACT BPA CP ADVISORY 24-03-01 11:33:56 ALARM CLASS:CENTRAL:023 CC:00566 EC:00506 UA:BAF0:C80F SP:4B84:1920 BP:193A LD:01-01-001-000 FORMAT:45 MESSAGE-ID: 00063...

Thanks for the answer Moriendi. But I don't know what I'm doing wrong, only this command works for me. CHANGE-KNMAT:NPI=UNKNOWN,LEVEL=0,ONNO=1,DNNOL=ROW,CONN=A,MODCON=OUT&TRANSH&TRANSI,NUMEXT=91; When I run this command...

Thanks for the answer Moriendi. Could you please confirm, if I got it correct. So KNMAT takes a DNNO from RICHT/LDAT not vice versa. Like I first do all of the trunk and destination stuff: ADD-TDCSU... ADD-RICHT:MODE=CD,LRTE=50,CD=A50,CPS=0,SVC=ALL,TGRP1=99,DESTNO=50,DNNO=50,PDNNO=50...

Thanks for the answer Moriendi. So far only this single command did exactly what I need. But this command works for all outgoing calls. CHANGE-KNMAT:NPI=UNKNOWN,LEVEL=0,ONNO=1,DNNOL=ROW,CONN=A,MODCON=ALL,NUMEXT=91; I tried these commands, but they didn't work as I expected...

Hi guys. I have an OpenScape 4000 v10 which is connected via SIP trunk to Yeastar. Trunk works without problems. OpenScape side - 4XXX Yeastar side - 1XXX I need to add the 210 prefix to 4XXX when calling any Yeastar subscriber. The only records I have are...

Hi. HiPath Manager -> Settings -> Least cost routing LCR flag should be checked - "Activate LCR" Check if the Dial Plan properly configured Least cost routing -> Dial plan

Hi. Check this (attached) might be useful. https://files.engineering.com/getfile.aspx?folder=93864db2-0fda-4d00-9417-7efa61e01e79&file=Screenshot_2023-09-20_175338.jpg

My bad. Better to check it first of course.

Do you have any SIP subscriber registered and working in your system? You can check if this CHANGE-ZAND:TYPE=OPTLOAD; is set in your system.

Hi. Most likely you need updated version of the Manager. If it's not version issue then try these: (1) Try to use Admin LAN Port: 192.168.2.1 (ip address of the Admin LAN Port) (2) Reset motherboard manually (if it's acceptable) and try to connect again...