Recent content by pbxkeyguy

Have? Worked on option 11c through 81c Always used tty ports to LOGI Have a new customer with all IP phones Not familiar with element manager or signaling server System has 3 cabinets Gateway controller NTDW60BBE5 CP-PM Pentium 1.4 Ghz NTDW61BAE5 Call Pilot NTRH30AA CP PM ADR10234B ?? Need...

If all ports are cross connected at the main frame how do I Find open available station port Customer wants to ADD more phones all ports wired KXTD 1236 PHONE SYSTEM

old Avaya Nortel Tech picked up a panasonic customer with kxtd 1236 with VM TVS50 customer needs program changes. needs name changes and voice mail box set up for a few employee's I have work on the KXTD 1236 a long time ago. I know port 1 is the program port. just need to know how to make name...

Have Merlin Legend phone system two issues 1st problem plug MLX 20 console into bottom left port press menu no system program comes up ? trying to find system program port. 2nd issue have lines 801 thru 810 in line pool need to remove 809 and 810 from access 9 out going line pool what is...

How to program Merlin Magic Phone system need to remove line from line pool. when dialing 9 plus out side number intermittently will have no dial tone. Also is there a way to direct select each groung start trunk from a phone ? just what to test each trunk.

Customer has Norstar 0x32 they want to expand and open another office. They want to keep the 0x32 in one location and install a new phone system in the second office and tie them together. Does Norstar support T1 Tie lines like 4 wire E&M trunks or does Tie lines need to be copper ? Also will a...

the front system greeting was removed by ini vm box and re set pass word still hear system message at the end of greeting is not availible please leave message at the end of the tone. is there a way to remove leave message lady in the can greeting ?

ok that worked but now i hear at the end of the message is not avaliable please leave a message after the tone. is there anyway to remove the lady in the can leave message ???

How to remove the lady in the can greeting . Programmed new voice mail box . X7622 when calling X7622 voice mail answers you here The person you are trying to reach is not available please leave a message after the tone. How do I remove the message and just hear the the greeting the customer...

expantion cabinet is a option 11

working on Nortel PBX with fiber remote cabinet that will not respond ? tried disabing loop 20 enabling loop 20 loop shows enabeled the far end cabinet will not respong all leds are let on all station cards can not enable problem started after power fail ? is there a force down load that is...

Nortel Option 11c with Call Pilot 150 mini lines adtn 700 ACD Dn 700 incoming COT trunks intermittently ring open ? Is there a way to have incoming trunk disconnect after so many rings ? Note lines are loop start ? no supervision are have the acd dn 700 rout back to 700 or rout to a extionsion

INSTALLED LINE 3 HAVE NO DIAL TONE ON ALL PHONES WHAT TO CHECK FOR ?

Have a ?? have a KX-ta624 phone system have two lines existing going to add the third line do you know the program codes to add 3rd line

have a KX-TA624 phone system added new co line 3 all phones have no dial tone anyone know the basic programming to add line 3 to ring and appear on all phones ?