Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Ozphonebloke

  1. Ozphonebloke

    Option 11C PSU cct diagram or voltage pinout

    Loopback55 I think your post was deleted? Huntertelephonecollection at gmail doc com
  2. Ozphonebloke

    Option 11C PSU cct diagram or voltage pinout

    Bringing an Option 11C back to life. Having the PSU serviced. Anyone have a PSU cct diagram or voltage pinout? Thank you
  3. Ozphonebloke

    Md110 version

    Not sure what i put that was controversial (I own all of the PABXS) Huntertelephonecollection at gmail dot com
  4. Ozphonebloke

    Md110 version

    Thank you. So BC13-ish :-) We have 5 x MD110s in the pabx collection. Working to get them all fully functioning and interconnected
  5. Ozphonebloke

    Md110 version

    Can anyone tell me what version/BC this system is? VERSION=CXP1010106/4/TSWSP03/R4A
  6. Ozphonebloke

    MD110 - ESU Backup

    One of our MD110s has an ESU and dongle/USB for voicemail. All works well (after initial issue with flat CMOS battery) Is it possible to back up the HDD and USB/Dongle so that if either fail a reload or replacement drive can be fitted?
  7. Ozphonebloke

    MD110 Console issues

    quick update - restarting some program units and the card via FIOL did assist. there is now two way speech (which was one of the faults) but the last fault is I cannot use the PC button on the console to toggle between the ring settings (i.e. short burst and long loud tone).
  8. Ozphonebloke

    MD110 Console issues

    Hi All, I am an Ericsson novice working with MD110s and other PABXs restoring them in a collection/museum. One of our MD110s has some odd things happening with the console - e.g. cannot turn off loud horn for incoming traffic. Tried swapping keyboards on the console and then tried swapping...
  9. Ozphonebloke

    Programming / Maintenance Software - Hicom 150 PABX

    Thank you sbcsu I am looking in there now. I will only download one at a time.
  10. Ozphonebloke

    Programming / Maintenance Software - Hicom 150 PABX

    Does anyone have a link to download the programming software for the Hicom 150 PABX - I believe it might be called Manager E. Just got a Hicom 150 into our collection and looking to set it up. Any advice welcome.
  11. Ozphonebloke

    meridian sl-1

    Where are you located?
  12. Ozphonebloke

    Fujitsu 9600 and E630 Systems

    ey Brains Trust, I know these things are all end of life, but i'm working on maintaining some Fujitsu PABXs in my phone collection and future museum. We have several F620 (9600S) and F640 (9600M) PABXs plus one E630 PABX. F620 To have a reasonably 'tricked out' F620 wont be too difficult. A...
  13. Ozphonebloke

    MD110 CONSONO PROGRAMMING

    PS the Lemo connectors are solid. My ASB30 and ASB100 consoles have them
  14. Ozphonebloke

    MD110 CONSONO PROGRAMMING

    Thanks you Himdp and snor Seems it is the older type. Let’s hope more of them are decommisioned soon
  15. Ozphonebloke

    MD110 CONSONO PROGRAMMING

    Thank you inlsp05 and himdp and for linking me to those threads. I will have to get better at searching. I will need to find an OPI-II. With any luck I will get another one being decommissioned soon enough. Will

Part and Inventory Search

Back
Top