Recent content by nitram11

Hello, all, here we have a problem with the configuration above: after connecting/pairing a bluetooth headset (Voyager legend plantronics - corect listed in the bt menue of the lip 8024) suceesfull with a lip 8024D Phone (with bluetooth adapter 8000 BTmu) we get a ringing signal on the...

Hello, xs650 thank you first for answering; for my second question i have found a old hint from a erisson tech; there seems to be a limitation of 16-17 Base Stations by max. current of the backplane; (i was wrong with 20, we have only 16 active bases at this time); when 1 now try to sighn...

Hello,. we have an old BP 250 System, which normally worked fine; PRM. is 18, 1.now for a long period the VMU-HD caused Errors (see images maintance logs below) and then need to be restarted after 3-4 days of working stable; it seems to me, that the CPUD-5 recognize the fail funktion,try to...

Hello, nfcphoneman + martinhodge thanks for reply + information; meanwhile i found some hints, that unfortunatly only eMG80/800 and UCP supports UCS clients - as Thermus commented.

Hello Thermus, first of all, thank you for answeriing; in our Mfim 300 MFIM/GS96M-F.1Dy SEP/17 Boot Version-2.1Aa NOV/12 Kernel Version-6.0Aq i found this in admin system management (under Lock key install); for me it looks like a possibility to install ucs; or was this only a feature...

Hello, all, we want to activate/proof the UCS Desktop Client Standart/Premium (first time) on two of our Workplaces; as our vendor told us, the SW of this client was no longer supported and available ( i think ,only for UCP anymore); on our Mfim 300 it is possible, to activate 3 clients...

Hello, martinhodge thank you very much for answering again on both questions; mfim once more is not so comfortable in these things (i wonder, if UCP will be better in some cases ?) ; i still work also with old aastra/ericsson businessphone systems at some location - it is so much easier to do...

Hello, all we have a few gap cordless phones (Ericsson dt412) in the dect Area af our Mfim 50b, which work o.k.; call transfer from this phones to annother cordless (even gdc handsets) den´t work, because r-button funktion seems to be not compatible with Mfim code;I have try t get a keypad...

Hello, all we want to delete 2 ip stations ( had been registered, but now no more in use and disconneted) in our 50b System, because of getting free ports in the system; is there any easy (right) way or workarraund, to prevent, that the the sequence of stations and numbers is moving (the 2...

...camp on isn´t allowed...have to made some more combinations intern-extern , might be, that it has to do with no operator extension in this system..? thank you both very much for this help, xs 650 + zoo1 !

Hello, zoo1 first thank you for your reply; have checked , if a key was programmed(was not) and also have programming a phonekey "free/busy on second line" ; activate/deaktivate makes no difference for incommming second calls; getting free line tone.. what is working correct. is, that led for...

Hello, all, have a problem with programming in a bp 128; have unchecked system cmd 2080 in bms ( free on 2 line) , but get a free line tone, not a busy tone, when a second call comes to "busy" extensions; is there something more to do in the trunks ?; thanks a lot for all hints.

Hello, Xs so i hope, trunk route programming -0 will not be influenced (never necesary for me, to deal with ddi,) now i will try thanks a lot and greetings from germany, martin

Hello, , XS thanks for your hint - will try, this when i have got the right bp config file - at the time i am awaiting for ... greetings , martin

Hello, all i want to get all incoming extern calls on head number 12345 -"0" landing on one extension with possibility of caller list; , but not operator; because (i think), caller list cannot be activated for operator extension in BP 128/250; ; i have try , to use a dbc 4223 acitivated as...